Gem State Dam, Idaho, USA

Home / USA / Idaho / Gem State Dam

Quick Facts About Gem State Dam

Location: Bonneville, Idaho
Coordinates: 43.4219, -112.102
River: Snake River
Primary Purpose: Hydroelectric
Type: Concrete Rockfill Gravity
Commissioned: 1988
Dam Height: 40 ft (12 m)
Dam Length: 1,136 ft (346 m)
Dam Capacity: 6,700 acre-ft (8,264 Ml)
Condition Assessment: Satisfactory

Gem State Dam Map

Here is a map of Gem State Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Gem State Dam Information

Gem State Dam is a concrete rockfill gravity dam located about 5 miles from Shelley, Id, Bonneville, Idaho.

The dam, which is on the Snake River, was primarily built for Hydroelectric purposes, but also serves for Irrigation benefits.

The dam was designed by CH2MHILL and commissioned in 1988 and is currently owned by City of Idaho Falls.

Gem State Dam Structure

The Gem State Dam is approximately 1,136 feet (346 m) long, 40 feet (12 m) high and has a structural volume of cubic yards (0 cubic metres).

Gem State Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,000 acre-ft (6,167 Ml) and maximum capacity of 6,700 acre-ft (8,264 Ml).

The surface area of the reservoir is 305 acres (123 ha) and the total catchment area is 4,650 square miles (12,043 square kilometres).

Gem State Dam Spillway

The dam has a 230 feet (70 m) wide controlled spillway with a maximum discharge capacity of 140000 cubic feet per second (3964 cubic metres per second).

Gem State Dam Compared to Four Famous American Dams

Gem State Dam
Bonneville, Idaho
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 40 730 550 357 216
Length (Ft) 1,136 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 6,700 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 4,650 167,800 74,100 3,611 108,355

Gem State Dam Weather

Current Conditions at Gem State Dam

Failed to fetch current weather data.

7-Day Forecast for Gem State Dam

Failed to fetch weather forecast data.

Gem State Dam Frequently Asked Questions

In which state is the Gem State Dam?

Gem State Dam is in Idaho.

In which county is the Gem State Dam?

Gem State Dam is in Bonneville County.

How high is the Gem State Dam?

Gem State Dam is 40 feet high.

How long is the Gem State Dam?

Gem State Dam is 1,136 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG