Brushy Creek Dam, Iowa, USA

Home / USA / Iowa / Brushy Creek Dam

Quick Facts About Brushy Creek Dam

Location: Webster, Iowa
Coordinates: 42.3873, -93.9789
River: Brushy Creek River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1998
Dam Height: 100 ft (30 m)
Dam Length: 1,950 ft (594 m)
Dam Capacity: 31,645 acre-ft (39,033 Ml)
Condition Assessment: Satisfactory

Brushy Creek Dam Map

Here is a map of Brushy Creek Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Brushy Creek Dam Information

Brushy Creek Dam is an earthen embankment dam located about 24 miles from Fraser, Webster, Iowa.

The dam, which is on the Brushy Creek River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by BRICE-PETRIDES/ DONAHUE and commissioned in 1998 and is currently owned by Iowa Department of Natural Resources.

Brushy Creek Dam Structure

The Brushy Creek Dam is approximately 1,950 feet (594 m) long, 100 feet (30 m) high and has a structural volume of 999,999 cubic yards (764,554 cubic metres).

Brushy Creek Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 19,660 acre-ft (24,250 Ml) and maximum capacity of 31,645 acre-ft (39,033 Ml).

The surface area of the reservoir is 690 acres (279 ha) and the total catchment area is 88 square miles (228 square kilometres).

Brushy Creek Dam Spillway

The dam has a 181 feet (55 m) wide uncontrolled spillway with a maximum discharge capacity of 0 cubic feet per second (0 cubic metres per second).

Brushy Creek Dam Compared to Four Famous American Dams

Brushy Creek Dam
Webster, Iowa
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 100 730 550 357 216
Length (Ft) 1,950 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 31,645 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 88 167,800 74,100 3,611 108,355

Brushy Creek Dam Weather

Current Conditions at Brushy Creek Dam

Parameter Value
Current Time 20:08
Sunrise 06:50
Sunset 19:35
Temperature (°F) 70
Feels Like (°F) 71
Cloud Coverage (%) 0
Pressure (inHg) 1015
Humidity (%) 78
Wind Speed (mph) 6
Rain (mm) 0

7-Day Forecast for Brushy Creek Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 57 81 79 1018 44 8 10 SSE 0 - clear sky
Fri 58 86 83 1011 41 17 35 S 0 - few clouds
Sat 61 79 75 1015 34 15 39 N 0 - scattered clouds
Sun 55 74 73 1019 39 12 25 SE 100 2 light rain
Mon 58 79 68 1011 89 20 45 SSE 100 22 moderate rain
Tue 61 73 69 1021 50 10 23 NW 100 24 heavy intensity rain
Wed 57 59 57 1027 83 10 22 ENE 100 5 moderate rain
Thu 59 67 65 1024 95 10 18 SE 100 2 light rain

Brushy Creek Dam Frequently Asked Questions

In which state is the Brushy Creek Dam?

Brushy Creek Dam is in Iowa.

In which county is the Brushy Creek Dam?

Brushy Creek Dam is in Webster County.

How high is the Brushy Creek Dam?

Brushy Creek Dam is 100 feet high.

How long is the Brushy Creek Dam?

Brushy Creek Dam is 1,950 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG