Burden Lake Dam, New York, USA

Home / USA / New York / Burden Lake Dam

Quick Facts About Burden Lake Dam

Location: Rensselaer, New York
Coordinates: 42.624056, -73.5665278
River: Tr-Wynantskill River
Primary Purpose: Recreation
Type: Earth Masonry
Commissioned: 1916
Dam Height: 24 ft (7 m)
Dam Length: 365 ft (111 m)
Dam Capacity: 7,600 acre-ft (9,374 Ml)
Hazard Potential: Significant

Burden Lake Dam Map

Here is a map of Burden Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Burden Lake Dam Information

Burden Lake Dam is an earth masonry dam located about 3 miles from West Sand Lake, Rensselaer, New York.

The dam, which is on the Tr-Wynantskill River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1916 and is currently owned by Burden Lake Preservation Corporation;Daniel L. Alger;Mr. Joseph and Mrs. Liane Densmore;RENSSELAER COUNTY.

Burden Lake Dam Structure

The Burden Lake Dam is approximately 365 feet (111 m) long, 24 feet (7 m) high and has a structural volume of cubic yards (0 cubic metres).

Burden Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,598 acre-ft (4,438 Ml) and maximum capacity of 7,600 acre-ft (9,374 Ml).

The surface area of the reservoir is 369 acres (149 ha) and the total catchment area is 4 square miles (11 square kilometres).

Burden Lake Dam Spillway

The dam has a 55 feet (17 m) wide controlled spillway with a maximum discharge capacity of cubic feet per second (0 cubic metres per second).

Burden Lake Dam Compared to Four Famous American Dams

Burden Lake Dam
Rensselaer, New York
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 24 730 550 357 216
Length (Ft) 365 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 7,600 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 4 167,800 74,100 3,611 108,355

Burden Lake Dam Weather

Current Conditions at Burden Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Burden Lake Dam

Failed to fetch weather forecast data.

Burden Lake Dam Frequently Asked Questions

In which state is the Burden Lake Dam?

Burden Lake Dam is in New York.

In which county is the Burden Lake Dam?

Burden Lake Dam is in Rensselaer County.

How high is the Burden Lake Dam?

Burden Lake Dam is 24 feet high.

How long is the Burden Lake Dam?

Burden Lake Dam is 365 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG