Rome City Dam, New York, USA

Home / USA / New York / Rome City Dam

Quick Facts About Rome City Dam

Location: Lewis, New York
Coordinates: 43.438611, -75.59
River: Fish Creek River
Primary Purpose: Water Supply
Type: Concrete
Commissioned: 1958
Dam Height: 85 ft (26 m)
Dam Length: 515 ft (157 m)
Dam Capacity: 8,625 acre-ft (10,639 Ml)

Rome City Dam Map

Here is a map of Rome City Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Rome City Dam Information

Rome City Dam is a concrete dam located about 5 miles from Point Rock, Lewis, New York.

The dam, which is on the Fish Creek River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 1958 and is currently owned by CITY OF ROME.

Rome City Dam Structure

The Rome City Dam is approximately 515 feet (157 m) long, 85 feet (26 m) high and has a structural volume of cubic yards (0 cubic metres).

Rome City Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 4,345 acre-ft (5,359 Ml) and maximum capacity of 8,625 acre-ft (10,639 Ml).

The surface area of the reservoir is 210 acres (85 ha) and the total catchment area is 94 square miles (243 square kilometres).

Rome City Dam Spillway

The dam has a 150 feet (46 m) wide uncontrolled spillway with a maximum discharge capacity of cubic feet per second (0 cubic metres per second).

Rome City Dam Compared to Four Famous American Dams

Rome City Dam
Lewis, New York
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 85 730 550 357 216
Length (Ft) 515 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 8,625 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 94 167,800 74,100 3,611 108,355

Rome City Dam Weather

Current Conditions at Rome City Dam

Failed to fetch current weather data.

7-Day Forecast for Rome City Dam

Failed to fetch weather forecast data.

Rome City Dam Frequently Asked Questions

In which state is the Rome City Dam?

Rome City Dam is in New York.

In which county is the Rome City Dam?

Rome City Dam is in Lewis County.

How high is the Rome City Dam?

Rome City Dam is 85 feet high.

How long is the Rome City Dam?

Rome City Dam is 515 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG