Sherman Island Dam, New York, USA

Home / USA / New York / Sherman Island Dam

Quick Facts About Sherman Island Dam

Location: Warren, New York
Coordinates: 43.273, -73.7203
River: Hudson River
Primary Purpose: Hydroelectric
Type: Concrete Buttress Gravity
Commissioned: 1923
Dam Height: 80 ft (24 m)
Dam Length: 1,538 ft (469 m)
Dam Capacity: 9,150 acre-ft (11,286 Ml)
Condition Assessment: Satisfactory

Sherman Island Dam Map

Here is a map of Sherman Island Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Sherman Island Dam Information

Sherman Island Dam is a concrete buttress gravity dam located about 10 miles from Hudson Falls, Warren, New York.

The dam, which is on the Hudson River, was primarily built for Hydroelectric purposes, but also serves for Recreation and Water Supply benefits.

The dam was designed by and commissioned in 1923 and is currently owned by Brookfield Renewable Power LLC NYRO.

Sherman Island Dam Structure

The Sherman Island Dam is approximately 1,538 feet (469 m) long, 80 feet (24 m) high and has a structural volume of cubic yards (0 cubic metres).

Sherman Island Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 9,150 acre-ft (11,286 Ml) and maximum capacity of 9,150 acre-ft (11,286 Ml).

The surface area of the reservoir is 305 acres (123 ha) and the total catchment area is 2,785 square miles (7,213 square kilometres).

Sherman Island Dam Spillway

The dam has a 949 feet (289 m) wide uncontrolled spillway with a maximum discharge capacity of 115000 cubic feet per second (3256 cubic metres per second).

Sherman Island Dam Compared to Four Famous American Dams

Sherman Island Dam
Warren, New York
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 80 730 550 357 216
Length (Ft) 1,538 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 9,150 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 2,785 167,800 74,100 3,611 108,355

Sherman Island Dam Weather

Current Conditions at Sherman Island Dam

Failed to fetch current weather data.

7-Day Forecast for Sherman Island Dam

Failed to fetch weather forecast data.

Sherman Island Dam Frequently Asked Questions

In which state is the Sherman Island Dam?

Sherman Island Dam is in New York.

In which county is the Sherman Island Dam?

Sherman Island Dam is in Warren County.

How high is the Sherman Island Dam?

Sherman Island Dam is 80 feet high.

How long is the Sherman Island Dam?

Sherman Island Dam is 1,538 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG