Stark Falls Dam, New York, USA

Home / USA / New York / Stark Falls Dam

Quick Facts About Stark Falls Dam

Location: St. Lawrence, New York
Coordinates: 44.4509, -74.766
River: Raquette River
Primary Purpose: Hydroelectric
Type: Gravity Concrete Rockfill
Commissioned: 1957
Dam Height: 35 ft (11 m)
Dam Length: 1,114 ft (340 m)
Dam Capacity: 12,854 acre-ft (15,855 Ml)
Condition Assessment: Satisfactory

Stark Falls Dam Map

Here is a map of Stark Falls Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Stark Falls Dam Information

Stark Falls Dam is a gravity concrete rockfill dam located about 1 miles from Stark, St. Lawrence, New York.

The dam, which is on the Raquette River, was primarily built for Hydroelectric purposes, but also serves for Recreation benefits.

The dam was designed by and commissioned in 1957 and is currently owned by Erie Boulevard Hydropower, L.P..

Stark Falls Dam Structure

The Stark Falls Dam is approximately 1,114 feet (340 m) long, 35 feet (11 m) high and has a structural volume of cubic yards (0 cubic metres).

Stark Falls Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 12,854 acre-ft (15,855 Ml) and maximum capacity of 12,854 acre-ft (15,855 Ml).

The surface area of the reservoir is 585 acres (237 ha) and the total catchment area is 877 square miles (2,271 square kilometres).

Stark Falls Dam Spillway

The dam has a 240 feet (73 m) wide uncontrolled spillway with a maximum discharge capacity of 35900 cubic feet per second (1017 cubic metres per second).

Stark Falls Dam Compared to Four Famous American Dams

Stark Falls Dam
St. Lawrence, New York
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 35 730 550 357 216
Length (Ft) 1,114 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 12,854 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 877 167,800 74,100 3,611 108,355

Stark Falls Dam Weather

Current Conditions at Stark Falls Dam

Failed to fetch current weather data.

7-Day Forecast for Stark Falls Dam

Failed to fetch weather forecast data.

Stark Falls Dam Frequently Asked Questions

In which state is the Stark Falls Dam?

Stark Falls Dam is in New York.

In which county is the Stark Falls Dam?

Stark Falls Dam is in St. Lawrence County.

How high is the Stark Falls Dam?

Stark Falls Dam is 35 feet high.

How long is the Stark Falls Dam?

Stark Falls Dam is 1,114 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG