W.D. Mayo Lock and Dam, Oklahoma, USA

Home / USA / Oklahoma / W.D. Mayo Lock and Dam

Quick Facts About W.D. Mayo Lock and Dam

Location: Sequoyah, Oklahoma
Coordinates: 35.315891, -94.5591395
River: Arkansas River
Primary Purpose: Navigation
Type: Gravity Earth
Commissioned: 1970
Dam Height: 71 ft (22 m)
Dam Length: 7,400 ft (2,256 m)
Dam Capacity: 15,800 acre-ft (19,489 Ml)
Hazard Potential: Significant
Condition Assessment: Not Available

W.D. Mayo Lock and Dam Map

Here is a map of W.D. Mayo Lock and Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

W.D. Mayo Lock and Dam Information

W.D. Mayo Lock and Dam is a gravity earth dam located in Arkhoma, Sequoyah, Oklahoma.

The dam, which is on the Arkansas River, was primarily built for Navigation purposes, but also serves for benefits.

The dam was designed by CESWT and commissioned in 1970 and is currently owned by USACE – Tulsa District.

W.D. Mayo Lock and Dam Structure

The W.D. Mayo Lock and Dam is approximately 7,400 feet (2,256 m) long, 71 feet (22 m) high and has a structural volume of 200,000 cubic yards (152,911 cubic metres).

W.D. Mayo Lock and Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 15,800 acre-ft (19,489 Ml) and maximum capacity of 15,800 acre-ft (19,489 Ml).

The surface area of the reservoir is 1,595 acres (645 ha) and the total catchment area is 148,084 square miles (383,536 square kilometres).

W.D. Mayo Lock and Dam Spillway

The dam has a 720 feet (219 m) wide controlled spillway with a maximum discharge capacity of 507000 cubic feet per second (14357 cubic metres per second).

W.D. Mayo Lock and Dam Compared to Four Famous American Dams

W.D. Mayo Lock and Dam
Sequoyah, Oklahoma
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 71 730 550 357 216
Length (Ft) 7,400 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 15,800 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 148,084 167,800 74,100 3,611 108,355

W.D. Mayo Lock and Dam Weather

Current Conditions at W.D. Mayo Lock and Dam

Failed to fetch current weather data.

7-Day Forecast for W.D. Mayo Lock and Dam

Failed to fetch weather forecast data.

W.D. Mayo Lock and Dam Frequently Asked Questions

In which state is the W.D. Mayo Lock and Dam?

W.D. Mayo Lock and Dam is in Oklahoma.

In which county is the W.D. Mayo Lock and Dam?

W.D. Mayo Lock and Dam is in Sequoyah County.

How high is the W.D. Mayo Lock and Dam?

W.D. Mayo Lock and Dam is 71 feet high.

How long is the W.D. Mayo Lock and Dam?

W.D. Mayo Lock and Dam is 7,400 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG