Wenas Dam, Washington, USA

Home / USA / Washington / Wenas Dam

Quick Facts About Wenas Dam

Location: Klickitat, Washington
Coordinates: 46.014261, -120.672009
River: Wenas Creek River
Primary Purpose: Irrigation
Type: Rockfill Earth
Commissioned: 1911
Dam Height: 90 ft (27 m)
Dam Length: 525 ft (160 m)
Dam Capacity: 5,500 acre-ft (6,784 Ml)

Wenas Dam Map

Here is a map of Wenas Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Wenas Dam Information

Wenas Dam is a rockfill earth dam located about 17 miles from Selah, Klickitat, Washington.

The dam, which is on the Wenas Creek River, was primarily built for Irrigation purposes, but also serves for Recreation benefits.

The dam was designed by Gray and Osborne and commissioned in 1911 and is currently owned by Wenas Irrigation District.

Wenas Dam Structure

The Wenas Dam is approximately 525 feet (160 m) long, 90 feet (27 m) high and has a structural volume of cubic yards (0 cubic metres).

Wenas Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,200 acre-ft (3,947 Ml) and maximum capacity of 5,500 acre-ft (6,784 Ml).

The surface area of the reservoir is acres (0 ha) and the total catchment area is 114 square miles (295 square kilometres).

Wenas Dam Spillway

The dam spillway has a maximum discharge capacity of 29000 cubic feet per second (821 cubic metres per second).

Wenas Dam Compared to Four Famous American Dams

Wenas Dam
Klickitat, Washington
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 90 730 550 357 216
Length (Ft) 525 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 5,500 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 114 167,800 74,100 3,611 108,355

Wenas Dam Weather

Current Conditions at Wenas Dam

Failed to fetch current weather data.

7-Day Forecast for Wenas Dam

Failed to fetch weather forecast data.

Wenas Dam Frequently Asked Questions

In which state is the Wenas Dam?

Wenas Dam is in Washington.

In which county is the Wenas Dam?

Wenas Dam is in Klickitat County.

How high is the Wenas Dam?

Wenas Dam is 90 feet high.

How long is the Wenas Dam?

Wenas Dam is 525 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG