David D. Terry Lock and Dam, Arkansas, USA

Home / USA / Arkansas / David D. Terry Lock and Dam

Quick Facts About David D. Terry Lock and Dam

Location: Pulaski, Arkansas
Coordinates: 34.666672, -92.154999
River: Arkansas River
Primary Purpose: Navigation
Type: Concrete Gravity
Commissioned: 1968
Dam Height: 28 ft (9 m)
Dam Length: 8,700 ft (2,652 m)
Dam Capacity: 59,600 acre-ft (73,515 Ml)
Hazard Potential: Significant
Condition Assessment: Not Available

David D. Terry Lock and Dam Map

Here is a map of David D. Terry Lock and Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

David D. Terry Lock and Dam Information

David D. Terry Lock and Dam is a concrete gravity dam located in Pine Bluff, Pulaski, Arkansas.

The dam, which is on the Arkansas River, was primarily built for Navigation purposes, but also serves for Recreation benefits.

The dam was designed by CESWL and commissioned in 1968 and is currently owned by USACE – Little Rock District.

David D. Terry Lock and Dam Structure

The David D. Terry Lock and Dam is approximately 8,700 feet (2,652 m) long, 28 feet (9 m) high and has a structural volume of 220,000 cubic yards (168,202 cubic metres).

David D. Terry Lock and Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 49,500 acre-ft (61,057 Ml) and maximum capacity of 59,600 acre-ft (73,515 Ml).

The surface area of the reservoir is 4,710 acres (1,906 ha) and the total catchment area is 158,288 square miles (409,964 square kilometres).

David D. Terry Lock and Dam Spillway

The dam has a 1190 feet (363 m) wide controlled spillway with a maximum discharge capacity of 340000 cubic feet per second (9628 cubic metres per second).

David D. Terry Lock and Dam Compared to Four Famous American Dams

David D. Terry Lock and Dam
Pulaski, Arkansas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 28 730 550 357 216
Length (Ft) 8,700 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 59,600 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 158,288 167,800 74,100 3,611 108,355

David D. Terry Lock and Dam Weather

Current Conditions at David D. Terry Lock and Dam

Failed to fetch current weather data.

7-Day Forecast for David D. Terry Lock and Dam

Failed to fetch weather forecast data.

David D. Terry Lock and Dam Frequently Asked Questions

In which state is the David D. Terry Lock and Dam?

David D. Terry Lock and Dam is in Arkansas.

In which county is the David D. Terry Lock and Dam?

David D. Terry Lock and Dam is in Pulaski County.

How high is the David D. Terry Lock and Dam?

David D. Terry Lock and Dam is 28 feet high.

How long is the David D. Terry Lock and Dam?

David D. Terry Lock and Dam is 8,700 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG