Alpine Dam, California, USA

Home / USA / California / Alpine Dam

Quick Facts About Alpine Dam

Location: Marin, California
Coordinates: 37.9408, -122.6387
River: Lagunitas Creek River
Primary Purpose: Other
Type: Gravity
Commissioned: 1917
Dam Height: 143 ft (44 m)
Dam Length: 524 ft (160 m)
Dam Capacity: 8,892 acre-ft (10,968 Ml)
Condition Assessment: Satisfactory

Alpine Dam Map

Here is a map of Alpine Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Alpine Dam Information

Alpine Dam is a gravity dam located about 12.8 miles from Point Reyes Station, Marin, California.

The dam, which is on the Lagunitas Creek River, was primarily built for Other purposes, but also serves for Water Supply benefits.

The dam was designed by and commissioned in 1917 and is currently owned by Marin Municipal Water District.

Alpine Dam Structure

The Alpine Dam is approximately 524 feet (160 m) long, 143 feet (44 m) high and has a structural volume of 59,368 cubic yards (45,390 cubic metres).

Alpine Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of acre-ft (0 Ml) and maximum capacity of 8,892 acre-ft (10,968 Ml).

The surface area of the reservoir is 224 acres (91 ha) and the total catchment area is 10 square miles (26 square kilometres).

Alpine Dam Spillway

According to the latest available data, the Alpine Dam does not have any spillways.

Alpine Dam Compared to Four Famous American Dams

Alpine Dam
Marin, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 143 730 550 357 216
Length (Ft) 524 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 8,892 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 10 167,800 74,100 3,611 108,355

Alpine Dam Weather

Current Conditions at Alpine Dam

Parameter Value
Current Time 19:55
Sunrise 06:39
Sunset 19:42
Temperature (°F) 59
Feels Like (°F) 59
Cloud Coverage (%) 94
Pressure (inHg) 1013
Humidity (%) 77
Wind Speed (mph) 5
Rain (mm) 0

7-Day Forecast for Alpine Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 53 69 67 1014 70 13 19 W 0 - scattered clouds
Tue 52 69 67 1016 61 11 18 SW 0 - overcast clouds
Wed 53 64 60 1018 77 10 14 S 61 0 light rain
Thu 52 60 57 1014 98 8 13 SSW 100 2 light rain
Fri 50 60 59 1013 67 13 20 WNW 0 - clear sky
Sat 51 60 59 1013 69 14 21 WNW 0 - clear sky
Sun 51 64 63 1014 63 8 11 W 0 - scattered clouds
Mon 58 69 68 1013 49 7 9 SW 0 - broken clouds

Alpine Dam Frequently Asked Questions

In which state is the Alpine Dam?

Alpine Dam is in California.

In which county is the Alpine Dam?

Alpine Dam is in Marin County.

How high is the Alpine Dam?

Alpine Dam is 143 feet high.

How long is the Alpine Dam?

Alpine Dam is 524 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG