Antelope Dam, California, USA

Home / USA / California / Antelope Dam

Quick Facts About Antelope Dam

Location: Plumas, California
Coordinates: 40.1808, -120.6076
River: Indian Creek River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1964
Dam Height: 113 ft (34 m)
Dam Length: 1,320 ft (402 m)
Dam Capacity: 22,566 acre-ft (27,835 Ml)
Condition Assessment: Satisfactory

Antelope Dam Map

Here is a map of Antelope Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Antelope Dam Information

Antelope Dam is an earthen embankment dam located about 20 miles from Taylorsville, Plumas, California.

The dam, which is on the Indian Creek River, was primarily built for Water Supply purposes, but also serves for Recreation benefits.

The dam was designed by and commissioned in 1964 and is currently owned by California Department of Water Resources.

Antelope Dam Structure

The Antelope Dam is approximately 1,320 feet (402 m) long, 113 feet (34 m) high and has a structural volume of 380,000 cubic yards (290,531 cubic metres).

Antelope Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of acre-ft (0 Ml) and maximum capacity of 22,566 acre-ft (27,835 Ml).

The surface area of the reservoir is 931 acres (377 ha) and the total catchment area is 71 square miles (184 square kilometres).

Antelope Dam Spillway

According to the latest available data, the Antelope Dam does not have any spillways.

Antelope Dam Compared to Four Famous American Dams

Antelope Dam
Plumas, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 113 730 550 357 216
Length (Ft) 1,320 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 22,566 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 71 167,800 74,100 3,611 108,355

Antelope Dam Weather

Current Conditions at Antelope Dam

Failed to fetch current weather data.

7-Day Forecast for Antelope Dam

Failed to fetch weather forecast data.

Antelope Dam Frequently Asked Questions

In which state is the Antelope Dam?

Antelope Dam is in California.

In which county is the Antelope Dam?

Antelope Dam is in Plumas County.

How high is the Antelope Dam?

Antelope Dam is 113 feet high.

How long is the Antelope Dam?

Antelope Dam is 1,320 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG