Copper Basin Dam, California, USA

Home / USA / California / Copper Basin Dam

Quick Facts About Copper Basin Dam

Location: San Bernardino, California
Coordinates: 34.279, -114.2227
River: Copper Basin River
Primary Purpose: Water Supply
Type: Arch
Commissioned: 1938
Dam Height: 184 ft (56 m)
Dam Length: 265 ft (81 m)
Dam Capacity: 22,000 acre-ft (27,137 Ml)
Condition Assessment: Satisfactory

Copper Basin Dam Map

Here is a map of Copper Basin Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Copper Basin Dam Information

Copper Basin Dam is an arch dam located about 6 miles from Parker Strip, San Bernardino, California.

The dam, which is on the Copper Basin River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 1938 and is currently owned by Metropolitan Water District Of Southern California.

Copper Basin Dam Structure

The Copper Basin Dam is approximately 265 feet (81 m) long, 184 feet (56 m) high and has a structural volume of 19,050 cubic yards (14,565 cubic metres).

Copper Basin Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of acre-ft (0 Ml) and maximum capacity of 22,000 acre-ft (27,137 Ml).

The surface area of the reservoir is 427 acres (173 ha) and the total catchment area is 8 square miles (21 square kilometres).

Copper Basin Dam Spillway

According to the latest available data, the Copper Basin Dam does not have any spillways.

Copper Basin Dam Compared to Four Famous American Dams

Copper Basin Dam
San Bernardino, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 184 730 550 357 216
Length (Ft) 265 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 22,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 8 167,800 74,100 3,611 108,355

Copper Basin Dam Weather

Current Conditions at Copper Basin Dam

Failed to fetch current weather data.

7-Day Forecast for Copper Basin Dam

Failed to fetch weather forecast data.

Copper Basin Dam Frequently Asked Questions

In which state is the Copper Basin Dam?

Copper Basin Dam is in California.

In which county is the Copper Basin Dam?

Copper Basin Dam is in San Bernardino County.

How high is the Copper Basin Dam?

Copper Basin Dam is 184 feet high.

How long is the Copper Basin Dam?

Copper Basin Dam is 265 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG