Del Valle Dam, California, USA

Home / USA / California / Del Valle Dam

Quick Facts About Del Valle Dam

Location: Alameda, California
Coordinates: 37.6157, -121.745
River: Arroyo Valle River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1968
Dam Height: 222 ft (68 m)
Dam Length: 880 ft (268 m)
Dam Capacity: 77,100 acre-ft (95,101 Ml)
Condition Assessment: Satisfactory

Del Valle Dam Map

Here is a map of Del Valle Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Del Valle Dam Information

Del Valle Dam is an earthen embankment dam located about 0.5 miles from Livermore, Alameda, California.

The dam, which is on the Arroyo Valle River, was primarily built for Flood Risk Reduction purposes, but also serves for Irrigation, Recreation and Water Supply benefits.

The dam was designed by and commissioned in 1968 and is currently owned by California Department of Water Resources.

Del Valle Dam Structure

The Del Valle Dam is approximately 880 feet (268 m) long, 222 feet (68 m) high and has a structural volume of 4,200,000 cubic yards (3,211,131 cubic metres).

Del Valle Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of acre-ft (0 Ml) and maximum capacity of 77,100 acre-ft (95,101 Ml).

The surface area of the reservoir is 710 acres (287 ha) and the total catchment area is 146 square miles (378 square kilometres).

Del Valle Dam Spillway

The dam spillway has a maximum discharge capacity of 47000 cubic feet per second (1331 cubic metres per second).

Del Valle Dam Compared to Four Famous American Dams

Del Valle Dam
Alameda, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 222 730 550 357 216
Length (Ft) 880 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 77,100 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 146 167,800 74,100 3,611 108,355

Del Valle Dam Weather

Current Conditions at Del Valle Dam

Failed to fetch current weather data.

7-Day Forecast for Del Valle Dam

Failed to fetch weather forecast data.

Del Valle Dam Frequently Asked Questions

In which state is the Del Valle Dam?

Del Valle Dam is in California.

In which county is the Del Valle Dam?

Del Valle Dam is in Alameda County.

How high is the Del Valle Dam?

Del Valle Dam is 222 feet high.

How long is the Del Valle Dam?

Del Valle Dam is 880 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG