Gene Wash Dam, California, USA

Home / USA / California / Gene Wash Dam

Quick Facts About Gene Wash Dam

Location: San Bernardino, California
Coordinates: 34.2999, -114.1663
River: Gene Wash River
Primary Purpose: Water Supply
Type: Arch
Commissioned: 1937
Dam Height: 140 ft (43 m)
Dam Length: 383 ft (117 m)
Dam Capacity: 6,300 acre-ft (7,771 Ml)
Condition Assessment: Satisfactory

Gene Wash Dam Map

Here is a map of Gene Wash Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Gene Wash Dam Information

Gene Wash Dam is an arch dam located in San Bernardino County, California.

The dam, which is on the Gene Wash River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 1937 and is currently owned by Metropolitan Water District Of Southern California.

Gene Wash Dam Structure

The Gene Wash Dam is approximately 383 feet (117 m) long, 140 feet (43 m) high and has a structural volume of 14,000 cubic yards (10,704 cubic metres).

Gene Wash Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of acre-ft (0 Ml) and maximum capacity of 6,300 acre-ft (7,771 Ml).

The surface area of the reservoir is 224 acres (91 ha) and the total catchment area is 6 square miles (15 square kilometres).

Gene Wash Dam Spillway

According to the latest available data, the Gene Wash Dam does not have any spillways.

Gene Wash Dam Compared to Four Famous American Dams

Gene Wash Dam
San Bernardino, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 140 730 550 357 216
Length (Ft) 383 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 6,300 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 6 167,800 74,100 3,611 108,355

Gene Wash Dam Weather

Current Conditions at Gene Wash Dam

Failed to fetch current weather data.

7-Day Forecast for Gene Wash Dam

Failed to fetch weather forecast data.

Gene Wash Dam Frequently Asked Questions

In which state is the Gene Wash Dam?

Gene Wash Dam is in California.

In which county is the Gene Wash Dam?

Gene Wash Dam is in San Bernardino County.

How high is the Gene Wash Dam?

Gene Wash Dam is 140 feet high.

How long is the Gene Wash Dam?

Gene Wash Dam is 383 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG