Indian Valley Dam, California, USA

Home / USA / California / Indian Valley Dam

Quick Facts About Indian Valley Dam

Location: Lake, California
Coordinates: 39.0795, -122.536
River: North Fork Cache Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1975
Dam Height: 207 ft (63 m)
Dam Length: 965 ft (294 m)
Dam Capacity: 359,000 acre-ft (442,819 Ml)
Condition Assessment: Not Available

Indian Valley Dam Map

Here is a map of Indian Valley Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Indian Valley Dam Information

Indian Valley Dam is an earthen embankment dam located about 4 miles from Spring Valley, Lake, California.

The dam, which is on the North Fork Cache Creek River, was primarily built for Irrigation purposes, but also serves for Fish and Wildlife Pond, Recreation, Hydroelectric, Water Supply and Flood Risk Reduction benefits.

The dam was designed by CH2M Hill and commissioned in 1975 and is currently owned by Yolo County Flood Control and Water Conservation District.

Indian Valley Dam Structure

The Indian Valley Dam is approximately 965 feet (294 m) long, 207 feet (63 m) high and has a structural volume of 1,825,000 cubic yards (1,395,313 cubic metres).

Indian Valley Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 261,000 acre-ft (321,938 Ml) and maximum capacity of 359,000 acre-ft (442,819 Ml).

The surface area of the reservoir is 3,750 acres (1,518 ha) and the total catchment area is 121 square miles (313 square kilometres).

Indian Valley Dam Spillway

The dam has a 59 feet (18 m) wide controlled spillway with a maximum discharge capacity of 35000 cubic feet per second (991 cubic metres per second).

Indian Valley Dam Compared to Four Famous American Dams

Indian Valley Dam
Lake, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 207 730 550 357 216
Length (Ft) 965 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 359,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 121 167,800 74,100 3,611 108,355

Indian Valley Dam Weather

Current Conditions at Indian Valley Dam

Failed to fetch current weather data.

7-Day Forecast for Indian Valley Dam

Failed to fetch weather forecast data.

Indian Valley Dam Frequently Asked Questions

In which state is the Indian Valley Dam?

Indian Valley Dam is in California.

In which county is the Indian Valley Dam?

Indian Valley Dam is in Lake County.

How high is the Indian Valley Dam?

Indian Valley Dam is 207 feet high.

How long is the Indian Valley Dam?

Indian Valley Dam is 965 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG