Lake Hemet Dam, California, USA

Home / USA / California / Lake Hemet Dam

Quick Facts About Lake Hemet Dam

Location: Riverside, California
Coordinates: 33.6652, -116.7064
River: Tr San Jacinto River
Primary Purpose: Water Supply
Type: Gravity
Commissioned: 1895
Dam Height: 135 ft (41 m)
Dam Length: 324 ft (99 m)
Dam Capacity: 14,000 acre-ft (17,269 Ml)
Condition Assessment: Satisfactory

Lake Hemet Dam Map

Here is a map of Lake Hemet Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Lake Hemet Dam Information

Lake Hemet Dam is a gravity dam located about 16.75 miles from Valle Vista, Riverside, California.

The dam, which is on the Tr San Jacinto River, was primarily built for Water Supply purposes, but also serves for Irrigation benefits.

The dam was designed by and commissioned in 1895 and is currently owned by Lake Hemet Municipal Water District.

Lake Hemet Dam Structure

The Lake Hemet Dam is approximately 324 feet (99 m) long, 135 feet (41 m) high and has a structural volume of 32,320 cubic yards (24,710 cubic metres).

Lake Hemet Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of acre-ft (0 Ml) and maximum capacity of 14,000 acre-ft (17,269 Ml).

The surface area of the reservoir is 470 acres (190 ha) and the total catchment area is 66 square miles (170 square kilometres).

Lake Hemet Dam Spillway

According to the latest available data, the Lake Hemet Dam does not have any spillways.

Lake Hemet Dam Compared to Four Famous American Dams

Lake Hemet Dam
Riverside, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 135 730 550 357 216
Length (Ft) 324 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 14,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 66 167,800 74,100 3,611 108,355

Lake Hemet Dam Weather

Current Conditions at Lake Hemet Dam

Failed to fetch current weather data.

7-Day Forecast for Lake Hemet Dam

Failed to fetch weather forecast data.

Lake Hemet Dam Frequently Asked Questions

In which state is the Lake Hemet Dam?

Lake Hemet Dam is in California.

In which county is the Lake Hemet Dam?

Lake Hemet Dam is in Riverside County.

How high is the Lake Hemet Dam?

Lake Hemet Dam is 135 feet high.

How long is the Lake Hemet Dam?

Lake Hemet Dam is 324 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG