Martis Creek Dam, California, USA

Home / USA / California / Martis Creek Dam

Quick Facts About Martis Creek Dam

Location: Nevada, California
Coordinates: 39.327234, -120.114789
River: Martis Creek River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1972
Dam Height: 93 ft (28 m)
Dam Length: 2,673 ft (815 m)
Dam Capacity: 34,600 acre-ft (42,678 Ml)
Condition Assessment: Not Available

Martis Creek Dam Map

Here is a map of Martis Creek Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Martis Creek Dam Information

Martis Creek Dam is an earthen embankment dam located about 32 miles from Reno, Nevada, California.

The dam, which is on the Martis Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for Recreation and Hydroelectric benefits.

The dam was designed by and commissioned in 1972 and is currently owned by USACE – Sacramento District.

Martis Creek Dam Structure

The Martis Creek Dam is approximately 2,673 feet (815 m) long, 93 feet (28 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Martis Creek Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 22,000 acre-ft (27,137 Ml) and maximum capacity of 34,600 acre-ft (42,678 Ml).

The surface area of the reservoir is 768 acres (311 ha) and the total catchment area is 39 square miles (101 square kilometres).

Martis Creek Dam Spillway

The dam has a 25 feet (8 m) wide uncontrolled spillway with a maximum discharge capacity of 4060 cubic feet per second (115 cubic metres per second).

Martis Creek Dam Compared to Four Famous American Dams

Martis Creek Dam
Nevada, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 93 730 550 357 216
Length (Ft) 2,673 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 34,600 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 39 167,800 74,100 3,611 108,355

Martis Creek Dam Weather

Current Conditions at Martis Creek Dam

Failed to fetch current weather data.

7-Day Forecast for Martis Creek Dam

Failed to fetch weather forecast data.

Martis Creek Dam Frequently Asked Questions

In which state is the Martis Creek Dam?

Martis Creek Dam is in California.

In which county is the Martis Creek Dam?

Martis Creek Dam is in Nevada County.

How high is the Martis Creek Dam?

Martis Creek Dam is 93 feet high.

How long is the Martis Creek Dam?

Martis Creek Dam is 2,673 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG