Mcswain Dam, California, USA

Home / USA / California / Mcswain Dam

Quick Facts About Mcswain Dam

Location: Mariposa, California
Coordinates: 37.521, -120.3109
River: Merced River
Primary Purpose: Hydroelectric
Type: Rockfill Earth
Commissioned: 1966
Dam Height: 97 ft (30 m)
Dam Length: 1,620 ft (494 m)
Dam Capacity: 9,730 acre-ft (12,002 Ml)
Condition Assessment: Not Available

Mcswain Dam Map

Here is a map of Mcswain Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Mcswain Dam Information

Mcswain Dam is a rockfill earth dam located about 8 miles from Snelling, Mariposa, California.

The dam, which is on the Merced River, was primarily built for Hydroelectric purposes, but also serves for Irrigation and Recreation benefits.

The dam was designed by and commissioned in 1966 and is currently owned by Merced Irrigation District.

Mcswain Dam Structure

The Mcswain Dam is approximately 1,620 feet (494 m) long, 97 feet (30 m) high and has a structural volume of cubic yards (0 cubic metres).

Mcswain Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 8,255 acre-ft (10,182 Ml) and maximum capacity of 9,730 acre-ft (12,002 Ml).

The surface area of the reservoir is 310 acres (125 ha) and the total catchment area is 1,054 square miles (2,730 square kilometres).

Mcswain Dam Spillway

The dam has a 625 feet (191 m) wide uncontrolled spillway with a maximum discharge capacity of 250000 cubic feet per second (7079 cubic metres per second).

Mcswain Dam Compared to Four Famous American Dams

Mcswain Dam
Mariposa, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 97 730 550 357 216
Length (Ft) 1,620 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 9,730 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1,054 167,800 74,100 3,611 108,355

Mcswain Dam Weather

Current Conditions at Mcswain Dam

Failed to fetch current weather data.

7-Day Forecast for Mcswain Dam

Failed to fetch weather forecast data.

Mcswain Dam Frequently Asked Questions

In which state is the Mcswain Dam?

Mcswain Dam is in California.

In which county is the Mcswain Dam?

Mcswain Dam is in Mariposa County.

How high is the Mcswain Dam?

Mcswain Dam is 97 feet high.

How long is the Mcswain Dam?

Mcswain Dam is 1,620 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG