Salinas Dam, California, USA

Home / USA / California / Salinas Dam

Quick Facts About Salinas Dam

Location: San Luis Obispo, California
Coordinates: 35.337156, -120.502729
River: Salinas River
Primary Purpose: Water Supply
Type: Concrete Arch
Commissioned: 1941
Dam Height: 135 ft (41 m)
Dam Length: 305 ft (93 m)
Dam Capacity: 43,200 acre-ft (53,286 Ml)
Condition Assessment: Not Available

Salinas Dam Map

Here is a map of Salinas Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Salinas Dam Information

Salinas Dam is a concrete arch dam located about 9 miles from Santa Margarita, San Luis Obispo, California.

The dam, which is on the Salinas River, was primarily built for Water Supply purposes, but also serves for Flood Risk Reduction benefits.

The dam was designed by CESPL and commissioned in 1941 and is currently owned by USACE – Los Angeles District.

Salinas Dam Structure

The Salinas Dam is approximately 305 feet (93 m) long, 135 feet (41 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Salinas Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 26,000 acre-ft (32,070 Ml) and maximum capacity of 43,200 acre-ft (53,286 Ml).

The surface area of the reservoir is 793 acres (321 ha) and the total catchment area is 111 square miles (287 square kilometres).

Salinas Dam Spillway

The dam has a 100 feet (30 m) wide uncontrolled spillway with a maximum discharge capacity of 27000 cubic feet per second (765 cubic metres per second).

Salinas Dam Compared to Four Famous American Dams

Salinas Dam
San Luis Obispo, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 135 730 550 357 216
Length (Ft) 305 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 43,200 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 111 167,800 74,100 3,611 108,355

Salinas Dam Weather

Current Conditions at Salinas Dam

Failed to fetch current weather data.

7-Day Forecast for Salinas Dam

Failed to fetch weather forecast data.

Salinas Dam Frequently Asked Questions

In which state is the Salinas Dam?

Salinas Dam is in California.

In which county is the Salinas Dam?

Salinas Dam is in San Luis Obispo County.

How high is the Salinas Dam?

Salinas Dam is 135 feet high.

How long is the Salinas Dam?

Salinas Dam is 305 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG