Salt Springs Valley Dam, California, USA

Home / USA / California / Salt Springs Valley Dam

Quick Facts About Salt Springs Valley Dam

Location: Calaveras, California
Coordinates: 38.0305, -120.7643
River: Rock Creek River
Primary Purpose: Other
Type: Earth
Commissioned: 1882
Dam Height: 47 ft (14 m)
Dam Length: 2,150 ft (655 m)
Dam Capacity: 10,900 acre-ft (13,445 Ml)

Salt Springs Valley Dam Map

Here is a map of Salt Springs Valley Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Salt Springs Valley Dam Information

Salt Springs Valley Dam is an earthen embankment dam located in Calaveras County, California.

The dam, which is on the Rock Creek River, was primarily built for Other purposes, but also serves for Tailings, Irrigation and Water Supply benefits.

The dam was designed by and commissioned in 1882 and is currently owned by Rock Creek Water District.

Salt Springs Valley Dam Structure

The Salt Springs Valley Dam is approximately 2,150 feet (655 m) long, 47 feet (14 m) high and has a structural volume of 148,685 cubic yards (113,678 cubic metres).

Salt Springs Valley Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of acre-ft (0 Ml) and maximum capacity of 10,900 acre-ft (13,445 Ml).

The surface area of the reservoir is 920 acres (372 ha) and the total catchment area is 20 square miles (52 square kilometres).

Salt Springs Valley Dam Spillway

According to the latest available data, the Salt Springs Valley Dam does not have any spillways.

Salt Springs Valley Dam Compared to Four Famous American Dams

Salt Springs Valley Dam
Calaveras, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 47 730 550 357 216
Length (Ft) 2,150 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 10,900 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 20 167,800 74,100 3,611 108,355

Salt Springs Valley Dam Weather

Current Conditions at Salt Springs Valley Dam

Parameter Value
Current Time 18:17
Sunrise 06:40
Sunset 19:19
Temperature (°F) 96
Feels Like (°F) 93
Cloud Coverage (%) 99
Pressure (inHg) 1011
Humidity (%) 21
Wind Speed (mph) 9
Rain (mm) 0

7-Day Forecast for Salt Springs Valley Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 69 96 93 1013 21 12 17 WNW 0 - clear sky
Fri 63 90 83 1011 11 9 9 WNW 0 - scattered clouds
Sat 60 89 82 1012 19 12 16 W 0 - clear sky
Sun 48 81 70 1014 26 9 13 NW 0 - clear sky
Mon 53 86 73 1011 20 7 6 W 0 - clear sky
Tue 56 87 76 1012 22 7 12 NNW 0 - clear sky
Wed 58 87 76 1014 23 8 16 NNW 0 - clear sky
Thu 56 86 74 1016 28 7 16 WNW 0 - clear sky

Salt Springs Valley Dam Frequently Asked Questions

In which state is the Salt Springs Valley Dam?

Salt Springs Valley Dam is in California.

In which county is the Salt Springs Valley Dam?

Salt Springs Valley Dam is in Calaveras County.

How high is the Salt Springs Valley Dam?

Salt Springs Valley Dam is 47 feet high.

How long is the Salt Springs Valley Dam?

Salt Springs Valley Dam is 2,150 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG