San Justo Dam, California, USA

Quick Facts About San Justo Dam

Location: San Benito, California
Coordinates: 36.8169, -121.4475
River: San Benito River Os
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1987
Dam Height: 151 ft (46 m)
Dam Length: 1,115 ft (340 m)
Dam Capacity: 11,693 acre-ft (14,423 Ml)
Condition Assessment: Not Available

San Justo Dam Map

Here is a map of San Justo Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

San Justo Dam Information

San Justo Dam is an earthen embankment dam located in Pacines, San Benito, California.

The dam, which is on the San Benito River Os, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1987 and is currently owned by US Bureau of Reclamation.

San Justo Dam Structure

The San Justo Dam is approximately 1,115 feet (340 m) long, 151 feet (46 m) high and has a structural volume of 811,000 cubic yards (620,054 cubic metres).

San Justo Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 10,308 acre-ft (12,715 Ml) and maximum capacity of 11,693 acre-ft (14,423 Ml).

The surface area of the reservoir is 208 acres (84 ha) and the total catchment area is 1 square miles (3 square kilometres).

San Justo Dam Spillway

The dam has a 508 feet (155 m) wide uncontrolled spillway with a maximum discharge capacity of 0 cubic feet per second (0 cubic metres per second).

San Justo Dam Compared to Four Famous American Dams

San Justo Dam
San Benito, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 151 730 550 357 216
Length (Ft) 1,115 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 11,693 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1 167,800 74,100 3,611 108,355

San Justo Dam Weather

Current Conditions at San Justo Dam

Failed to fetch current weather data.

7-Day Forecast for San Justo Dam

Failed to fetch weather forecast data.

San Justo Dam Frequently Asked Questions

In which state is the San Justo Dam?

San Justo Dam is in California.

In which county is the San Justo Dam?

San Justo Dam is in San Benito County.

How high is the San Justo Dam?

San Justo Dam is 151 feet high.

How long is the San Justo Dam?

San Justo Dam is 1,115 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG