San Pablo Dam, California, USA

Home / USA / California / San Pablo Dam

Quick Facts About San Pablo Dam

Location: Contra Costa, California
Coordinates: 37.9446, -122.2598
River: San Pablo Creek River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1920
Dam Height: 170 ft (52 m)
Dam Length: 1,250 ft (381 m)
Dam Capacity: 43,193 acre-ft (53,278 Ml)
Condition Assessment: Satisfactory

San Pablo Dam Map

Here is a map of San Pablo Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

San Pablo Dam Information

San Pablo Dam is an earthen embankment dam located in Contra Costa County, California.

The dam, which is on the San Pablo Creek River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 1920 and is currently owned by East Bay Municipal Utility District.

San Pablo Dam Structure

The San Pablo Dam is approximately 1,250 feet (381 m) long, 170 feet (52 m) high and has a structural volume of 2,200,000 cubic yards (1,682,021 cubic metres).

San Pablo Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of acre-ft (0 Ml) and maximum capacity of 43,193 acre-ft (53,278 Ml).

The surface area of the reservoir is 854 acres (346 ha) and the total catchment area is 32 square miles (83 square kilometres).

San Pablo Dam Spillway

According to the latest available data, the San Pablo Dam does not have any spillways.

San Pablo Dam Compared to Four Famous American Dams

San Pablo Dam
Contra Costa, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 170 730 550 357 216
Length (Ft) 1,250 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 43,193 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 32 167,800 74,100 3,611 108,355

San Pablo Dam Weather

Current Conditions at San Pablo Dam

Failed to fetch current weather data.

7-Day Forecast for San Pablo Dam

Failed to fetch weather forecast data.

San Pablo Dam Frequently Asked Questions

In which state is the San Pablo Dam?

San Pablo Dam is in California.

In which county is the San Pablo Dam?

San Pablo Dam is in Contra Costa County.

How high is the San Pablo Dam?

San Pablo Dam is 170 feet high.

How long is the San Pablo Dam?

San Pablo Dam is 1,250 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG