Vail Dam, California, USA

Home / USA / California / Vail Dam

Quick Facts About Vail Dam

Location: Riverside, California
Coordinates: 33.4968, -116.9776
River: Temecula Creek River
Primary Purpose: Water Supply
Type: Arch
Commissioned: 1949
Dam Height: 152 ft (46 m)
Dam Length: 788 ft (240 m)
Dam Capacity: 51,000 acre-ft (62,907 Ml)

Vail Dam Map

Here is a map of Vail Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Vail Dam Information

Vail Dam is an arch dam located about 7 miles from Temecula, Riverside, California.

The dam, which is on the Temecula Creek River, was primarily built for Water Supply purposes, but also serves for Irrigation benefits.

The dam was designed by and commissioned in 1949 and is currently owned by Rancho California Water District.

Vail Dam Structure

The Vail Dam is approximately 788 feet (240 m) long, 152 feet (46 m) high and has a structural volume of 30,360 cubic yards (23,212 cubic metres).

Vail Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of acre-ft (0 Ml) and maximum capacity of 51,000 acre-ft (62,907 Ml).

The surface area of the reservoir is 1,078 acres (436 ha) and the total catchment area is 318 square miles (825 square kilometres).

Vail Dam Spillway

According to the latest available data, the Vail Dam does not have any spillways.

Vail Dam Compared to Four Famous American Dams

Vail Dam
Riverside, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 152 730 550 357 216
Length (Ft) 788 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 51,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 318 167,800 74,100 3,611 108,355

Vail Dam Weather

Current Conditions at Vail Dam

Failed to fetch current weather data.

7-Day Forecast for Vail Dam

Failed to fetch weather forecast data.

Vail Dam Frequently Asked Questions

In which state is the Vail Dam?

Vail Dam is in California.

In which county is the Vail Dam?

Vail Dam is in Riverside County.

How high is the Vail Dam?

Vail Dam is 152 feet high.

How long is the Vail Dam?

Vail Dam is 788 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG