Warren H. Brock Reservoir Dikes, California, USA

Home / USA / California / Warren H. Brock Reservoir Dikes

Quick Facts About Warren H. Brock Reservoir Dikes

Location: Imperial, California
Coordinates: 32.709939, -115.031946
River: Offstream River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 2010
Dam Height: 14 ft (4 m)
Dam Length: 17,580 ft (5,358 m)
Dam Capacity: 8,000 acre-ft (9,868 Ml)
Condition Assessment: Not Available

Warren H. Brock Reservoir Dikes Map

Here is a map of Warren H. Brock Reservoir Dikes with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Warren H. Brock Reservoir Dikes Information

Warren H. Brock Reservoir Dikes is an earthen embankment dam located in None, Imperial, California.

The dam, which is on the Offstream River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 2010 and is currently owned by US Bureau of Reclamation.

Warren H. Brock Reservoir Dikes Structure

The Warren H. Brock Reservoir Dikes is approximately 17,580 feet (5,358 m) long, 14 feet (4 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Warren H. Brock Reservoir Dikes Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 8,000 acre-ft (9,868 Ml) and maximum capacity of 8,000 acre-ft (9,868 Ml).

The surface area of the reservoir is 410 acres (166 ha) and the total catchment area is 0 square miles (0 square kilometres).

Warren H. Brock Reservoir Dikes Spillway

The dam spillway has a maximum discharge capacity of 1800 cubic feet per second (51 cubic metres per second).

Warren H. Brock Reservoir Dikes Compared to Four Famous American Dams

Warren H. Brock Reservoir Dikes
Imperial, California
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 14 730 550 357 216
Length (Ft) 17,580 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 8,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 0 167,800 74,100 3,611 108,355

Warren H. Brock Reservoir Dikes Weather

Current Conditions at Warren H. Brock Reservoir Dikes

Failed to fetch current weather data.

7-Day Forecast for Warren H. Brock Reservoir Dikes

Failed to fetch weather forecast data.

Warren H. Brock Reservoir Dikes Frequently Asked Questions

In which state is the Warren H. Brock Reservoir Dikes?

Warren H. Brock Reservoir Dikes is in California.

In which county is the Warren H. Brock Reservoir Dikes?

Warren H. Brock Reservoir Dikes is in Imperial County.

How high is the Warren H. Brock Reservoir Dikes?

Warren H. Brock Reservoir Dikes is 14 feet high.

How long is the Warren H. Brock Reservoir Dikes?

Warren H. Brock Reservoir Dikes is 17,580 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG