Cheesman Dam, Colorado, USA

Home / USA / Colorado / Cheesman Dam

Quick Facts About Cheesman Dam

Location: Jefferson, Colorado
Coordinates: 39.208333, -105.273901
River: South Platte River
Primary Purpose: Water Supply
Type: Masonry Arch
Commissioned: 1905
Dam Height: 221 ft (67 m)
Dam Length: 710 ft (216 m)
Dam Capacity: 87,227 acre-ft (107,593 Ml)
Condition Assessment: Satisfactory

Cheesman Dam Map

Here is a map of Cheesman Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Cheesman Dam Information

Cheesman Dam is a masonry arch dam located about 5 miles from Deckers, Jefferson, Colorado.

The dam, which is on the South Platte River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 1905 and is currently owned by DENVER BOARD OF WATER COMMISSIONERS.

Cheesman Dam Structure

The Cheesman Dam is approximately 710 feet (216 m) long, 221 feet (67 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Cheesman Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 79,064 acre-ft (97,524 Ml) and maximum capacity of 87,227 acre-ft (107,593 Ml).

The surface area of the reservoir is 874 acres (354 ha) and the total catchment area is 1,750 square miles (4,532 square kilometres).

Cheesman Dam Spillway

The dam has a 280 feet (85 m) wide uncontrolled spillway with a maximum discharge capacity of 8571 cubic feet per second (243 cubic metres per second).

Cheesman Dam Compared to Four Famous American Dams

Cheesman Dam
Jefferson, Colorado
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 221 730 550 357 216
Length (Ft) 710 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 87,227 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1,750 167,800 74,100 3,611 108,355

Cheesman Dam Weather

Current Conditions at Cheesman Dam

Failed to fetch current weather data.

7-Day Forecast for Cheesman Dam

Failed to fetch weather forecast data.

Cheesman Dam Frequently Asked Questions

In which state is the Cheesman Dam?

Cheesman Dam is in Colorado.

In which county is the Cheesman Dam?

Cheesman Dam is in Jefferson County.

How high is the Cheesman Dam?

Cheesman Dam is 221 feet high.

How long is the Cheesman Dam?

Cheesman Dam is 710 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG