Lone Tree Dam, Colorado, USA

Home / USA / Colorado / Lone Tree Dam

Quick Facts About Lone Tree Dam

Location: Larimer, Colorado
Coordinates: 40.347651, -105.115995
River: Big Thompson River-Os
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1882
Dam Height: 29 ft (9 m)
Dam Length: 5,265 ft (1,605 m)
Dam Capacity: 10,973 acre-ft (13,535 Ml)
Hazard Potential: Significant
Condition Assessment: Satisfactory

Lone Tree Dam Map

Here is a map of Lone Tree Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Lone Tree Dam Information

Lone Tree Dam is an earthen embankment dam located about 11 miles from Johnstown, Larimer, Colorado.

The dam, which is on the Big Thompson River-Os, was primarily built for Irrigation purposes, but also serves for Fish and Wildlife Pond and Recreation benefits.

The dam was designed by and commissioned in 1882 and is currently owned by CONSOLIDATED HOME SUPPLY DITCH & RES. CO (DAVE SCH.

Lone Tree Dam Structure

The Lone Tree Dam is approximately 5,265 feet (1,605 m) long, 29 feet (9 m) high and has a structural volume of 79,124 cubic yards (60,495 cubic metres).

Lone Tree Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 9,268 acre-ft (11,432 Ml) and maximum capacity of 10,973 acre-ft (13,535 Ml).

The surface area of the reservoir is 503 acres (204 ha) and the total catchment area is 5 square miles (13 square kilometres).

Lone Tree Dam Spillway

The dam has a 900 feet (274 m) wide uncontrolled spillway with a maximum discharge capacity of 14280 cubic feet per second (404 cubic metres per second).

Lone Tree Dam Compared to Four Famous American Dams

Lone Tree Dam
Larimer, Colorado
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 29 730 550 357 216
Length (Ft) 5,265 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 10,973 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 5 167,800 74,100 3,611 108,355

Lone Tree Dam Weather

Current Conditions at Lone Tree Dam

Failed to fetch current weather data.

7-Day Forecast for Lone Tree Dam

Failed to fetch weather forecast data.

Lone Tree Dam Frequently Asked Questions

In which state is the Lone Tree Dam?

Lone Tree Dam is in Colorado.

In which county is the Lone Tree Dam?

Lone Tree Dam is in Larimer County.

How high is the Lone Tree Dam?

Lone Tree Dam is 29 feet high.

How long is the Lone Tree Dam?

Lone Tree Dam is 5,265 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG