Williams Creek Dam, Colorado, USA

Home / USA / Colorado / Williams Creek Dam

Quick Facts About Williams Creek Dam

Location: Hinsdale, Colorado
Coordinates: 37.503339, -107.222792
River: Williams Creek River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1958
Dam Height: 84 ft (26 m)
Dam Length: 550 ft (168 m)
Dam Capacity: 14,543 acre-ft (17,938 Ml)
Condition Assessment: Satisfactory

Williams Creek Dam Map

Here is a map of Williams Creek Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Williams Creek Dam Information

Williams Creek Dam is an earthen embankment dam located about 26 miles from Piedra, Hinsdale, Colorado.

The dam, which is on the Williams Creek River, was primarily built for Recreation purposes, but also serves for Fish and Wildlife Pond benefits.

The dam was designed by and commissioned in 1958 and is currently owned by COLORADO PARKS AND WILDLIFE.

Williams Creek Dam Structure

The Williams Creek Dam is approximately 550 feet (168 m) long, 84 feet (26 m) high and has a structural volume of cubic yards (0 cubic metres).

Williams Creek Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 10,084 acre-ft (12,438 Ml) and maximum capacity of 14,543 acre-ft (17,938 Ml).

The surface area of the reservoir is 343 acres (139 ha) and the total catchment area is 36 square miles (93 square kilometres).

Williams Creek Dam Spillway

The dam has a 40 feet (12 m) wide uncontrolled spillway with a maximum discharge capacity of 4100 cubic feet per second (116 cubic metres per second).

Williams Creek Dam Compared to Four Famous American Dams

Williams Creek Dam
Hinsdale, Colorado
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 84 730 550 357 216
Length (Ft) 550 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 14,543 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 36 167,800 74,100 3,611 108,355

Williams Creek Dam Weather

Current Conditions at Williams Creek Dam

Failed to fetch current weather data.

7-Day Forecast for Williams Creek Dam

Failed to fetch weather forecast data.

Williams Creek Dam Frequently Asked Questions

In which state is the Williams Creek Dam?

Williams Creek Dam is in Colorado.

In which county is the Williams Creek Dam?

Williams Creek Dam is in Hinsdale County.

How high is the Williams Creek Dam?

Williams Creek Dam is 84 feet high.

How long is the Williams Creek Dam?

Williams Creek Dam is 550 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG