Williams-Mccreery Dam, Colorado, USA

Home / USA / Colorado / Williams-Mccreery Dam

Quick Facts About Williams-Mccreery Dam

Location: Morgan, Colorado
Coordinates: 40.053657, -103.882613
River: San Arroyo Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1910
Dam Height: 51 ft (16 m)
Dam Length: 3,800 ft (1,158 m)
Dam Capacity: 23,500 acre-ft (28,987 Ml)

Williams-Mccreery Dam Map

Here is a map of Williams-Mccreery Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Williams-Mccreery Dam Information

Williams-Mccreery Dam is an earthen embankment dam located about 12 miles from Fort Morgan, Morgan, Colorado.

The dam, which is on the San Arroyo Creek River, was primarily built for Irrigation purposes, but also serves for Water Supply benefits.

The dam was designed by J.E. YOUNGQUIST and commissioned in 1910 and is currently owned by COLORADO STATE LAND BOARD, NORTH CENTRAL DST (BROO.

Williams-Mccreery Dam Structure

The Williams-Mccreery Dam is approximately 3,800 feet (1,158 m) long, 51 feet (16 m) high and has a structural volume of 56,938 cubic yards (43,532 cubic metres).

Williams-Mccreery Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 1,924 acre-ft (2,373 Ml) and maximum capacity of 23,500 acre-ft (28,987 Ml).

The surface area of the reservoir is 298 acres (121 ha) and the total catchment area is 69 square miles (179 square kilometres).

Williams-Mccreery Dam Spillway

The dam has a 1852 feet (564 m) wide uncontrolled spillway with a maximum discharge capacity of 51990 cubic feet per second (1472 cubic metres per second).

Williams-Mccreery Dam Compared to Four Famous American Dams

Williams-Mccreery Dam
Morgan, Colorado
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 51 730 550 357 216
Length (Ft) 3,800 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 23,500 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 69 167,800 74,100 3,611 108,355

Williams-Mccreery Dam Weather

Current Conditions at Williams-Mccreery Dam

Parameter Value
Current Time 18:50
Sunrise 05:39
Sunset 20:23
Temperature (°F) 88
Feels Like (°F) 85
Cloud Coverage (%) 44
Pressure (inHg) 1008
Humidity (%) 25
Wind Speed (mph) 10
Rain (mm) 0

7-Day Forecast for Williams-Mccreery Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 68 93 90 1009 29 22 37 SSE 0 - overcast clouds
Fri 68 95 89 1010 18 18 31 E 0 - clear sky
Sat 70 97 90 1010 20 15 30 ESE 0 - clear sky
Sun 72 101 95 1007 16 15 30 SE 0 - clear sky
Mon 74 103 96 1007 16 18 32 ESE 0 - clear sky
Tue 71 90 83 1018 28 18 28 ESE 0 - clear sky
Wed 68 99 90 1013 24 20 31 S 100 1 light rain
Thu 67 93 89 1012 29 22 22 NNE 100 1 light rain

Williams-Mccreery Dam Frequently Asked Questions

In which state is the Williams-Mccreery Dam?

Williams-Mccreery Dam is in Colorado.

In which county is the Williams-Mccreery Dam?

Williams-Mccreery Dam is in Morgan County.

How high is the Williams-Mccreery Dam?

Williams-Mccreery Dam is 51 feet high.

How long is the Williams-Mccreery Dam?

Williams-Mccreery Dam is 3,800 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG