Ellithorpe Flood Control Site #5 Dam, Connecticut, USA

Home / USA / Connecticut / Ellithorpe Flood Control Site #5 Dam

Quick Facts About Ellithorpe Flood Control Site #5 Dam

Location: Tolland, Connecticut
Coordinates: 41.996892, -72.323069
River: Middle River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1968
Dam Height: 29 ft (9 m)
Dam Length: 4,250 ft (1,295 m)
Dam Capacity: 5,860 acre-ft (7,228 Ml)

Ellithorpe Flood Control Site #5 Dam Map

Here is a map of Ellithorpe Flood Control Site #5 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Ellithorpe Flood Control Site #5 Dam Information

Ellithorpe Flood Control Site #5 Dam is an earthen embankment dam located in Stafford, Tolland, Connecticut.

The dam, which is on the Middle River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by USDA NRCS and commissioned in 1968 and is currently owned by CONNECTICUT DEEP.

Ellithorpe Flood Control Site #5 Dam Structure

The Ellithorpe Flood Control Site #5 Dam is approximately 4,250 feet (1,295 m) long, 29 feet (9 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Ellithorpe Flood Control Site #5 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 4,070 acre-ft (5,020 Ml) and maximum capacity of 5,860 acre-ft (7,228 Ml).

The surface area of the reservoir is 371 acres (150 ha) and the total catchment area is 10 square miles (27 square kilometres).

Ellithorpe Flood Control Site #5 Dam Spillway

The dam has a 23 feet (7 m) wide uncontrolled spillway with a maximum discharge capacity of 5400 cubic feet per second (153 cubic metres per second).

Ellithorpe Flood Control Site #5 Dam Compared to Four Famous American Dams

Ellithorpe Flood Control Site #5 Dam
Tolland, Connecticut
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 29 730 550 357 216
Length (Ft) 4,250 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 5,860 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 10 167,800 74,100 3,611 108,355

Ellithorpe Flood Control Site #5 Dam Weather

Current Conditions at Ellithorpe Flood Control Site #5 Dam

Failed to fetch current weather data.

7-Day Forecast for Ellithorpe Flood Control Site #5 Dam

Failed to fetch weather forecast data.

Ellithorpe Flood Control Site #5 Dam Frequently Asked Questions

In which state is the Ellithorpe Flood Control Site #5 Dam?

Ellithorpe Flood Control Site #5 Dam is in Connecticut.

In which county is the Ellithorpe Flood Control Site #5 Dam?

Ellithorpe Flood Control Site #5 Dam is in Tolland County.

How high is the Ellithorpe Flood Control Site #5 Dam?

Ellithorpe Flood Control Site #5 Dam is 29 feet high.

How long is the Ellithorpe Flood Control Site #5 Dam?

Ellithorpe Flood Control Site #5 Dam is 4,250 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG