Richards Corner Compensating Dam, Connecticut, USA

Home / USA / Connecticut / Richards Corner Compensating Dam

Quick Facts About Richards Corner Compensating Dam

Location: Litchfield, Connecticut
Coordinates: 41.880544, -72.958081
River: E Br Farmington R River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1920
Dam Height: 75 ft (23 m)
Dam Length: 950 ft (290 m)
Dam Capacity: 13,470 acre-ft (16,615 Ml)

Richards Corner Compensating Dam Map

Here is a map of Richards Corner Compensating Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Richards Corner Compensating Dam Information

Richards Corner Compensating Dam is an earthen embankment dam located in New Hartford, Litchfield, Connecticut.

The dam, which is on the E Br Farmington R River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 1920 and is currently owned by METROPOLITAN DISTRICT COMMISSION.

Richards Corner Compensating Dam Structure

The Richards Corner Compensating Dam is approximately 950 feet (290 m) long, 75 feet (23 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Richards Corner Compensating Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 11,510 acre-ft (14,197 Ml) and maximum capacity of 13,470 acre-ft (16,615 Ml).

The surface area of the reservoir is 455 acres (184 ha) and the total catchment area is 61 square miles (159 square kilometres).

Richards Corner Compensating Dam Spillway

According to the latest available data, the Richards Corner Compensating Dam does not have any spillways.

Richards Corner Compensating Dam Compared to Four Famous American Dams

Richards Corner Compensating Dam
Litchfield, Connecticut
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 75 730 550 357 216
Length (Ft) 950 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 13,470 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 61 167,800 74,100 3,611 108,355

Richards Corner Compensating Dam Weather

Current Conditions at Richards Corner Compensating Dam

Failed to fetch current weather data.

7-Day Forecast for Richards Corner Compensating Dam

Failed to fetch weather forecast data.

Richards Corner Compensating Dam Frequently Asked Questions

In which state is the Richards Corner Compensating Dam?

Richards Corner Compensating Dam is in Connecticut.

In which county is the Richards Corner Compensating Dam?

Richards Corner Compensating Dam is in Litchfield County.

How high is the Richards Corner Compensating Dam?

Richards Corner Compensating Dam is 75 feet high.

How long is the Richards Corner Compensating Dam?

Richards Corner Compensating Dam is 950 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG