Thomaston Dam, Connecticut, USA

Home / USA / Connecticut / Thomaston Dam

Quick Facts About Thomaston Dam

Location: Litchfield, Connecticut
Coordinates: 41.695016, -73.0623066
River: Naugatuck River
Primary Purpose: Flood Risk Reduction
Type: Rockfill Earth Gravity
Commissioned: 1960
Dam Height: 137 ft (42 m)
Dam Length: 2,000 ft (610 m)
Dam Capacity: 63,000 acre-ft (77,709 Ml)
Condition Assessment: Not Available

Thomaston Dam Map

Here is a map of Thomaston Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Thomaston Dam Information

Thomaston Dam is a rockfill earth gravity dam located in Thomaston, Litchfield, Connecticut.

The dam, which is on the Naugatuck River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by CENAE and commissioned in 1960 and is currently owned by USACE – New England District.

Thomaston Dam Structure

The Thomaston Dam is approximately 2,000 feet (610 m) long, 137 feet (42 m) high and has a structural volume of 1,484,700 cubic yards (1,135,135 cubic metres).

Thomaston Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 0 acre-ft (0 Ml) and maximum capacity of 63,000 acre-ft (77,709 Ml).

The surface area of the reservoir is 1 acres (0 ha) and the total catchment area is 97 square miles (251 square kilometres).

Thomaston Dam Spillway

The dam has a 435 feet (133 m) wide uncontrolled spillway with a maximum discharge capacity of 132200 cubic feet per second (3743 cubic metres per second).

Thomaston Dam Compared to Four Famous American Dams

Thomaston Dam
Litchfield, Connecticut
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 137 730 550 357 216
Length (Ft) 2,000 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 63,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 97 167,800 74,100 3,611 108,355

Thomaston Dam Weather

Current Conditions at Thomaston Dam

Failed to fetch current weather data.

7-Day Forecast for Thomaston Dam

Failed to fetch weather forecast data.

Thomaston Dam Frequently Asked Questions

In which state is the Thomaston Dam?

Thomaston Dam is in Connecticut.

In which county is the Thomaston Dam?

Thomaston Dam is in Litchfield County.

How high is the Thomaston Dam?

Thomaston Dam is 137 feet high.

How long is the Thomaston Dam?

Thomaston Dam is 2,000 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG