Payne Creek Settling Area No 4 Dam, Florida, USA

Home / USA / Florida / Payne Creek Settling Area No 4 Dam

Quick Facts About Payne Creek Settling Area No 4 Dam

Location: Polk, Florida
Coordinates: 27.709999, -81.93
River: Payne Creek River
Primary Purpose: Tailings
Type: Earth
Commissioned: 1969
Dam Height: 58 ft (18 m)
Dam Length: 20,200 ft (6,157 m)
Dam Capacity: 11,000 acre-ft (13,568 Ml)

Payne Creek Settling Area No 4 Dam Map

Here is a map of Payne Creek Settling Area No 4 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Payne Creek Settling Area No 4 Dam Information

Payne Creek Settling Area No 4 Dam is an earthen embankment dam located about 6 miles from Fort Meade, Polk, Florida.

The dam, which is on the Payne Creek River, was primarily built for Tailings purposes, but also serves for benefits.

The dam was designed by and commissioned in 1969 and is currently owned by THE MOSAIC COMPANY.

Payne Creek Settling Area No 4 Dam Structure

The Payne Creek Settling Area No 4 Dam is approximately 20,200 feet (6,157 m) long, 58 feet (18 m) high and has a structural volume of 19,962 cubic yards (15,262 cubic metres).

Payne Creek Settling Area No 4 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 10,520 acre-ft (12,976 Ml) and maximum capacity of 11,000 acre-ft (13,568 Ml).

The surface area of the reservoir is 344 acres (139 ha) and the total catchment area is 0 square miles (0 square kilometres).

Payne Creek Settling Area No 4 Dam Spillway

According to the latest available data, the Payne Creek Settling Area No 4 Dam does not have any spillways.

Payne Creek Settling Area No 4 Dam Compared to Four Famous American Dams

Payne Creek Settling Area No 4 Dam
Polk, Florida
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 58 730 550 357 216
Length (Ft) 20,200 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 11,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 0 167,800 74,100 3,611 108,355

Payne Creek Settling Area No 4 Dam Weather

Current Conditions at Payne Creek Settling Area No 4 Dam

Failed to fetch current weather data.

7-Day Forecast for Payne Creek Settling Area No 4 Dam

Failed to fetch weather forecast data.

Payne Creek Settling Area No 4 Dam Frequently Asked Questions

In which state is the Payne Creek Settling Area No 4 Dam?

Payne Creek Settling Area No 4 Dam is in Florida.

In which county is the Payne Creek Settling Area No 4 Dam?

Payne Creek Settling Area No 4 Dam is in Polk County.

How high is the Payne Creek Settling Area No 4 Dam?

Payne Creek Settling Area No 4 Dam is 58 feet high.

How long is the Payne Creek Settling Area No 4 Dam?

Payne Creek Settling Area No 4 Dam is 20,200 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG