Sa6 Fort Meade Dam, Florida, USA

Home / USA / Florida / Sa6 Fort Meade Dam

Quick Facts About Sa6 Fort Meade Dam

Location: Polk, Florida
Coordinates: 27.6763, -81.841202
River: Peace River
Primary Purpose: Tailings
Type: Earth
Commissioned: 1990
Dam Height: 45 ft (14 m)
Dam Length: 17,100 ft (5,212 m)
Dam Capacity: 19,500 acre-ft (24,053 Ml)
Hazard Potential: Significant

Sa6 Fort Meade Dam Map

Here is a map of Sa6 Fort Meade Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Sa6 Fort Meade Dam Information

Sa6 Fort Meade Dam is an earthen embankment dam located in Fort Meade, Polk, Florida.

The dam, which is on the Peace River, was primarily built for Tailings purposes, but also serves for benefits.

The dam was designed by ARDAMAN & ASSOCIATES and commissioned in 1990 and is currently owned by THE MOSAIC COMPANY.

Sa6 Fort Meade Dam Structure

The Sa6 Fort Meade Dam is approximately 17,100 feet (5,212 m) long, 45 feet (14 m) high and has a structural volume of 4,240,000 cubic yards (3,241,713 cubic metres).

Sa6 Fort Meade Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 18,000 acre-ft (22,203 Ml) and maximum capacity of 19,500 acre-ft (24,053 Ml).

The surface area of the reservoir is 450 acres (182 ha) and the total catchment area is 1 square miles (2 square kilometres).

Sa6 Fort Meade Dam Spillway

The dam has a 64 feet (20 m) wide controlled spillway with a maximum discharge capacity of 30 cubic feet per second (1 cubic metres per second).

Sa6 Fort Meade Dam Compared to Four Famous American Dams

Sa6 Fort Meade Dam
Polk, Florida
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 45 730 550 357 216
Length (Ft) 17,100 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 19,500 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1 167,800 74,100 3,611 108,355

Sa6 Fort Meade Dam Weather

Current Conditions at Sa6 Fort Meade Dam

Failed to fetch current weather data.

7-Day Forecast for Sa6 Fort Meade Dam

Failed to fetch weather forecast data.

Sa6 Fort Meade Dam Frequently Asked Questions

In which state is the Sa6 Fort Meade Dam?

Sa6 Fort Meade Dam is in Florida.

In which county is the Sa6 Fort Meade Dam?

Sa6 Fort Meade Dam is in Polk County.

How high is the Sa6 Fort Meade Dam?

Sa6 Fort Meade Dam is 45 feet high.

How long is the Sa6 Fort Meade Dam?

Sa6 Fort Meade Dam is 17,100 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG