Settling Area A Dike, Florida, USA

Home / USA / Florida / Settling Area A Dike

Quick Facts About Settling Area A Dike

Location: Polk, Florida
Coordinates: 27.68, -81.860001
River: Unnamed Pond River
Primary Purpose: Tailings
Type: Earth
Commissioned: 1965
Dam Height: 35 ft (11 m)
Dam Length: 13,360 ft (4,072 m)
Dam Capacity: 5,600 acre-ft (6,907 Ml)

Settling Area A Dike Map

Here is a map of Settling Area A Dike with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Settling Area A Dike Information

Settling Area A Dike is an earthen embankment dam located about 5 miles from Fort Meade, Polk, Florida.

The dam, which is on the Unnamed Pond River, was primarily built for Tailings purposes, but also serves for benefits.

The dam was designed by and commissioned in 1965 and is currently owned by THE MOSAIC COMPANY.

Settling Area A Dike Structure

The Settling Area A Dike is approximately 13,360 feet (4,072 m) long, 35 feet (11 m) high and has a structural volume of 5,600 cubic yards (4,282 cubic metres).

Settling Area A Dike Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,600 acre-ft (6,907 Ml) and maximum capacity of 5,600 acre-ft (6,907 Ml).

The surface area of the reservoir is 160 acres (65 ha) and the total catchment area is 0 square miles (0 square kilometres).

Settling Area A Dike Spillway

The dam spillway has a maximum discharge capacity of 122 cubic feet per second (3 cubic metres per second).

Settling Area A Dike Compared to Four Famous American Dams

Settling Area A Dike
Polk, Florida
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 35 730 550 357 216
Length (Ft) 13,360 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 5,600 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 0 167,800 74,100 3,611 108,355

Settling Area A Dike Weather

Current Conditions at Settling Area A Dike

Failed to fetch current weather data.

7-Day Forecast for Settling Area A Dike

Failed to fetch weather forecast data.

Settling Area A Dike Frequently Asked Questions

In which state is the Settling Area A Dike?

Settling Area A Dike is in Florida.

In which county is the Settling Area A Dike?

Settling Area A Dike is in Polk County.

How high is the Settling Area A Dike?

Settling Area A Dike is 35 feet high.

How long is the Settling Area A Dike?

Settling Area A Dike is 13,360 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG