Cedar Creek Dam, Idaho, USA

Home / USA / Idaho / Cedar Creek Dam

Quick Facts About Cedar Creek Dam

Location: Twin Falls, Idaho
Coordinates: 42.2237, -114.8795
River: Cedar Creek Salmon Falls Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1920
Dam Height: 90 ft (27 m)
Dam Length: 400 ft (122 m)
Dam Capacity: acre-ft (0 Ml)

Cedar Creek Dam Map

Here is a map of Cedar Creek Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Cedar Creek Dam Information

Cedar Creek Dam is dam located about 9 miles from Cedar Creek Crossing, Twin Falls, Idaho.

The dam, which is on the Cedar Creek Salmon Falls Creek River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1920 and is currently owned by .

Cedar Creek Dam Structure

The Cedar Creek Dam is approximately 400 feet (122 m) long, 90 feet (27 m) high and has a structural volume of cubic yards (0 cubic metres).

Cedar Creek Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 30,000 acre-ft (37,004 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 1,050 acres (425 ha) and the total catchment area is 128 square miles (332 square kilometres).

Cedar Creek Dam Spillway

The dam has a 20 feet (6 m) wide uncontrolled spillway with a maximum discharge capacity of 235 cubic feet per second (7 cubic metres per second).

Cedar Creek Dam Compared to Four Famous American Dams

Cedar Creek Dam
Twin Falls, Idaho
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 90 730 550 357 216
Length (Ft) 400 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 128 167,800 74,100 3,611 108,355

Cedar Creek Dam Weather

Current Conditions at Cedar Creek Dam

Failed to fetch current weather data.

7-Day Forecast for Cedar Creek Dam

Failed to fetch weather forecast data.

Cedar Creek Dam Frequently Asked Questions

In which state is the Cedar Creek Dam?

Cedar Creek Dam is in Idaho.

In which county is the Cedar Creek Dam?

Cedar Creek Dam is in Twin Falls County.

How high is the Cedar Creek Dam?

Cedar Creek Dam is 90 feet high.

How long is the Cedar Creek Dam?

Cedar Creek Dam is 400 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG