Crane Creek Dike

Crane Creek Dike Quick Facts

Location: Washington, Idaho
Coordinates: 44.3655, -116.6208
River: Crane Creek Weiser River
Primary Purpose: Other
Type: Earth
Commissioned: 1912
Dam Height: 25 ft (7 m)
Dam Length: 1,800 ft (549 m)
Dam Capacity: acre-ft (0 Ml)
Share Crane Creek Dike:

Crane Creek Dike Map

Crane Creek Dike Information

Crane Creek Dike is dam located about 15 miles from Weiser, Washington, Idaho.

The dam, which is on the Crane Creek Weiser River, was primarily built for Other purposes, but also serves for benefits.

The dam was designed by and commissioned in 1912 and is currently owned by .

Crane Creek Dike Structure

The Crane Creek Dike is approximately 1,800 feet (549 m) long, 25 feet (7 m) high and has a structural volume of cubic yards (0 cubic metres).

Crane Creek Dike Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 35,300 acre-ft (43,542 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 3,000 acres (1,214 ha) and the total catchment area is 242 square miles (627 square kilometres).

Crane Creek Dike Spillway

The dam spillway has a maximum discharge capacity of 4330 cubic feet per second (123 cubic metres per second).

Crane Creek Dike Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Crane Creek Dike
Washington, Idaho
Height (ft)
25
Length (Ft)
1,800
Storage Volume (acre-ft)
Drainage Area (sq miles)
242
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Crane Creek Dike Weather

Current Conditions at Crane Creek Dike

Failed to fetch current weather data.

7-Day Forecast for Crane Creek Dike

Failed to fetch weather forecast data.

Crane Creek Dike Frequently Asked Questions

In which state is the Crane Creek Dike?

Crane Creek Dike is in Idaho.

In which county is the Crane Creek Dike?

Crane Creek Dike is in Washington County.

How high is the Crane Creek Dike?

Crane Creek Dike is 25 feet high.

How long is the Crane Creek Dike?

Crane Creek Dike is 1,800 feet long.

Share Crane Creek Dike:

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG