Henrys Lake Dam, Idaho, USA

Home / USA / Idaho / Henrys Lake Dam

Quick Facts About Henrys Lake Dam

Location: Fremont, Idaho
Coordinates: 44.5973, -111.3533
River: Henrys Fork Snake River
Primary Purpose: Other
Type: Earth
Commissioned: 1923
Dam Height: 25 ft (8 m)
Dam Length: 408 ft (124 m)
Dam Capacity: acre-ft (0 Ml)

Henrys Lake Dam Map

Here is a map of Henrys Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Henrys Lake Dam Information

Henrys Lake Dam is dam located about 10 miles from Macks Inn, Fremont, Idaho.

The dam, which is on the Henrys Fork Snake River, was primarily built for Other purposes, but also serves for benefits.

The dam was designed by and commissioned in 1923 and is currently owned by .

Henrys Lake Dam Structure

The Henrys Lake Dam is approximately 408 feet (124 m) long, 25 feet (8 m) high and has a structural volume of cubic yards (0 cubic metres).

Henrys Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 58,700 acre-ft (72,405 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 6,050 acres (2,448 ha) and the total catchment area is 93 square miles (242 square kilometres).

Henrys Lake Dam Spillway

The dam has a 35 feet (11 m) wide controlled spillway with a maximum discharge capacity of 1175 cubic feet per second (33 cubic metres per second).

Henrys Lake Dam Compared to Four Famous American Dams

Henrys Lake Dam
Fremont, Idaho
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 25 730 550 357 216
Length (Ft) 408 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 93 167,800 74,100 3,611 108,355

Henrys Lake Dam Weather

Current Conditions at Henrys Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Henrys Lake Dam

Failed to fetch weather forecast data.

Henrys Lake Dam Frequently Asked Questions

In which state is the Henrys Lake Dam?

Henrys Lake Dam is in Idaho.

In which county is the Henrys Lake Dam?

Henrys Lake Dam is in Fremont County.

How high is the Henrys Lake Dam?

Henrys Lake Dam is 25 feet high.

How long is the Henrys Lake Dam?

Henrys Lake Dam is 408 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG