Hot Springs No 2 Dam, Idaho, USA

Home / USA / Idaho / Hot Springs No 2 Dam

Quick Facts About Hot Springs No 2 Dam

Location: Elmore, Idaho
Coordinates: 43.0824, -115.499
River: Hot Spring Creek Bennett Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1968
Dam Height: 41 ft (13 m)
Dam Length: 8,100 ft (2,469 m)
Dam Capacity: acre-ft (0 Ml)

Hot Springs No 2 Dam Map

Here is a map of Hot Springs No 2 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Hot Springs No 2 Dam Information

Hot Springs No 2 Dam is dam located in Elmore County, Idaho.

The dam, which is on the Hot Spring Creek Bennett Creek River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1968 and is currently owned by .

Hot Springs No 2 Dam Structure

The Hot Springs No 2 Dam is approximately 8,100 feet (2,469 m) long, 41 feet (13 m) high and has a structural volume of cubic yards (0 cubic metres).

Hot Springs No 2 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,334 acre-ft (6,579 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 430 acres (174 ha) and the total catchment area is 20 square miles (52 square kilometres).

Hot Springs No 2 Dam Spillway

The dam has a 41.8 feet (13 m) wide controlled spillway with a maximum discharge capacity of 100 cubic feet per second (3 cubic metres per second).

Hot Springs No 2 Dam Compared to Four Famous American Dams

Hot Springs No 2 Dam
Elmore, Idaho
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 41 730 550 357 216
Length (Ft) 8,100 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 20 167,800 74,100 3,611 108,355

Hot Springs No 2 Dam Weather

Current Conditions at Hot Springs No 2 Dam

Failed to fetch current weather data.

7-Day Forecast for Hot Springs No 2 Dam

Failed to fetch weather forecast data.

Hot Springs No 2 Dam Frequently Asked Questions

In which state is the Hot Springs No 2 Dam?

Hot Springs No 2 Dam is in Idaho.

In which county is the Hot Springs No 2 Dam?

Hot Springs No 2 Dam is in Elmore County.

How high is the Hot Springs No 2 Dam?

Hot Springs No 2 Dam is 41 feet high.

How long is the Hot Springs No 2 Dam?

Hot Springs No 2 Dam is 8,100 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG