Mountain Home Dam, Idaho, USA

Home / USA / Idaho / Mountain Home Dam

Quick Facts About Mountain Home Dam

Location: Elmore, Idaho
Coordinates: 43.1571, -115.6624
River: Rattlesnake Creek Canyon Creek River
Primary Purpose: Other
Type: Earth
Commissioned: 1884
Dam Height: 48 ft (15 m)
Dam Length: 3,700 ft (1,128 m)
Dam Capacity: acre-ft (0 Ml)

Mountain Home Dam Map

Here is a map of Mountain Home Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Mountain Home Dam Information

Mountain Home Dam is dam located about 1 miles from Mountain Home, Elmore, Idaho.

The dam, which is on the Rattlesnake Creek Canyon Creek River, was primarily built for Other purposes, but also serves for benefits.

The dam was designed by and commissioned in 1884 and is currently owned by .

Mountain Home Dam Structure

The Mountain Home Dam is approximately 3,700 feet (1,128 m) long, 48 feet (15 m) high and has a structural volume of cubic yards (0 cubic metres).

Mountain Home Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,468 acre-ft (6,745 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 406 acres (164 ha) and the total catchment area is 37 square miles (96 square kilometres).

Mountain Home Dam Spillway

The dam has a 75 feet (23 m) wide uncontrolled spillway with a maximum discharge capacity of 0 cubic feet per second (0 cubic metres per second).

Mountain Home Dam Compared to Four Famous American Dams

Mountain Home Dam
Elmore, Idaho
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 48 730 550 357 216
Length (Ft) 3,700 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 37 167,800 74,100 3,611 108,355

Mountain Home Dam Weather

Current Conditions at Mountain Home Dam

Failed to fetch current weather data.

7-Day Forecast for Mountain Home Dam

Failed to fetch weather forecast data.

Mountain Home Dam Frequently Asked Questions

In which state is the Mountain Home Dam?

Mountain Home Dam is in Idaho.

In which county is the Mountain Home Dam?

Mountain Home Dam is in Elmore County.

How high is the Mountain Home Dam?

Mountain Home Dam is 48 feet high.

How long is the Mountain Home Dam?

Mountain Home Dam is 3,700 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG