Murtaugh Lake Dam, Idaho, USA

Home / USA / Idaho / Murtaugh Lake Dam

Quick Facts About Murtaugh Lake Dam

Location: Twin Falls, Idaho
Coordinates: 42.4692, -114.1676
River: Dry Creek Snake River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1905
Dam Height: 42 ft (13 m)
Dam Length: 8,000 ft (2,438 m)
Dam Capacity: acre-ft (0 Ml)

Murtaugh Lake Dam Map

Here is a map of Murtaugh Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Murtaugh Lake Dam Information

Murtaugh Lake Dam is dam located about 1 miles from Murtaugh, Twin Falls, Idaho.

The dam, which is on the Dry Creek Snake River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1905 and is currently owned by .

Murtaugh Lake Dam Structure

The Murtaugh Lake Dam is approximately 8,000 feet (2,438 m) long, 42 feet (13 m) high and has a structural volume of cubic yards (0 cubic metres).

Murtaugh Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 7,720 acre-ft (9,522 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 827 acres (335 ha) and the total catchment area is 238 square miles (616 square kilometres).

Murtaugh Lake Dam Spillway

The dam has a 25.5 feet (8 m) wide controlled spillway with a maximum discharge capacity of 0 cubic feet per second (0 cubic metres per second).

Murtaugh Lake Dam Compared to Four Famous American Dams

Murtaugh Lake Dam
Twin Falls, Idaho
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 42 730 550 357 216
Length (Ft) 8,000 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 238 167,800 74,100 3,611 108,355

Murtaugh Lake Dam Weather

Current Conditions at Murtaugh Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Murtaugh Lake Dam

Failed to fetch weather forecast data.

Murtaugh Lake Dam Frequently Asked Questions

In which state is the Murtaugh Lake Dam?

Murtaugh Lake Dam is in Idaho.

In which county is the Murtaugh Lake Dam?

Murtaugh Lake Dam is in Twin Falls County.

How high is the Murtaugh Lake Dam?

Murtaugh Lake Dam is 42 feet high.

How long is the Murtaugh Lake Dam?

Murtaugh Lake Dam is 8,000 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG