Oakley Dam, Idaho, USA

Home / USA / Idaho / Oakley Dam

Quick Facts About Oakley Dam

Location: Cassia, Idaho
Coordinates: 42.1963, -113.9168
River: Goose Creek Snake River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1916
Dam Height: 145 ft (44 m)
Dam Length: 1,070 ft (326 m)
Dam Capacity: acre-ft (0 Ml)

Oakley Dam Map

Here is a map of Oakley Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Oakley Dam Information

Oakley Dam is dam located about 4 miles from Oakley, Cassia, Idaho.

The dam, which is on the Goose Creek Snake River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1916 and is currently owned by .

Oakley Dam Structure

The Oakley Dam is approximately 1,070 feet (326 m) long, 145 feet (44 m) high and has a structural volume of cubic yards (0 cubic metres).

Oakley Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 76,000 acre-ft (93,744 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 1,350 acres (546 ha) and the total catchment area is 729 square miles (1,888 square kilometres).

Oakley Dam Spillway

The dam has a 555 feet (169 m) wide controlled spillway with a maximum discharge capacity of 1240 cubic feet per second (35 cubic metres per second).

Oakley Dam Compared to Four Famous American Dams

Oakley Dam
Cassia, Idaho
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 145 730 550 357 216
Length (Ft) 1,070 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 729 167,800 74,100 3,611 108,355

Oakley Dam Weather

Current Conditions at Oakley Dam

Failed to fetch current weather data.

7-Day Forecast for Oakley Dam

Failed to fetch weather forecast data.

Oakley Dam Frequently Asked Questions

In which state is the Oakley Dam?

Oakley Dam is in Idaho.

In which county is the Oakley Dam?

Oakley Dam is in Cassia County.

How high is the Oakley Dam?

Oakley Dam is 145 feet high.

How long is the Oakley Dam?

Oakley Dam is 1,070 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG