Ririe Dam, Idaho, USA

Home / USA / Idaho / Ririe Dam

Quick Facts About Ririe Dam

Location: Bonneville, Idaho
Coordinates: 43.582, -111.7425
River: Willow Creek River
Primary Purpose: Flood Risk Reduction
Type: Rockfill Earth
Commissioned: 1976
Dam Height: 253 ft (77 m)
Dam Length: 1,070 ft (326 m)
Dam Capacity: 100,500 acre-ft (123,965 Ml)
Condition Assessment: Not Available

Ririe Dam Map

Here is a map of Ririe Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Ririe Dam Information

Ririe Dam is a rockfill earth dam located about 11 miles from Ueon, Bonneville, Idaho.

The dam, which is on the Willow Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for Irrigation and Recreation benefits.

The dam was designed by and commissioned in 1976 and is currently owned by US Bureau of Reclamation.

Ririe Dam Structure

The Ririe Dam is approximately 1,070 feet (326 m) long, 253 feet (77 m) high and has a structural volume of 2,676,000 cubic yards (2,045,949 cubic metres).

Ririe Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 90,500 acre-ft (111,630 Ml) and maximum capacity of 100,500 acre-ft (123,965 Ml).

The surface area of the reservoir is 1,560 acres (631 ha) and the total catchment area is 487 square miles (1,261 square kilometres).

Ririe Dam Spillway

The dam has a 111 feet (34 m) wide controlled spillway with a maximum discharge capacity of 40000 cubic feet per second (1133 cubic metres per second).

Ririe Dam Compared to Four Famous American Dams

Ririe Dam
Bonneville, Idaho
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 253 730 550 357 216
Length (Ft) 1,070 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 100,500 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 487 167,800 74,100 3,611 108,355

Ririe Dam Weather

Current Conditions at Ririe Dam

Failed to fetch current weather data.

7-Day Forecast for Ririe Dam

Failed to fetch weather forecast data.

Ririe Dam Frequently Asked Questions

In which state is the Ririe Dam?

Ririe Dam is in Idaho.

In which county is the Ririe Dam?

Ririe Dam is in Bonneville County.

How high is the Ririe Dam?

Ririe Dam is 253 feet high.

How long is the Ririe Dam?

Ririe Dam is 1,070 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG