Texas Basin Dam, Idaho, USA

Home / USA / Idaho / Texas Basin Dam

Quick Facts About Texas Basin Dam

Location: Owyhee, Idaho
Coordinates: 43.1805, -116.972
River: Succor Creek Snake River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1979
Dam Height: 121 ft (37 m)
Dam Length: 380 ft (116 m)
Dam Capacity: acre-ft (0 Ml)

Texas Basin Dam Map

Here is a map of Texas Basin Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Texas Basin Dam Information

Texas Basin Dam is dam located about 4 miles from Us Hwy 95, Owyhee, Idaho.

The dam, which is on the Succor Creek Snake River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by AandE and commissioned in 1979 and is currently owned by .

Texas Basin Dam Structure

The Texas Basin Dam is approximately 380 feet (116 m) long, 121 feet (37 m) high and has a structural volume of cubic yards (0 cubic metres).

Texas Basin Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 6,340 acre-ft (7,820 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 190 acres (77 ha) and the total catchment area is 52 square miles (134 square kilometres).

Texas Basin Dam Spillway

The dam has a 26 feet (8 m) wide uncontrolled spillway with a maximum discharge capacity of 6280 cubic feet per second (178 cubic metres per second).

Texas Basin Dam Compared to Four Famous American Dams

Texas Basin Dam
Owyhee, Idaho
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 121 730 550 357 216
Length (Ft) 380 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 52 167,800 74,100 3,611 108,355

Texas Basin Dam Weather

Current Conditions at Texas Basin Dam

Failed to fetch current weather data.

7-Day Forecast for Texas Basin Dam

Failed to fetch weather forecast data.

Texas Basin Dam Frequently Asked Questions

In which state is the Texas Basin Dam?

Texas Basin Dam is in Idaho.

In which county is the Texas Basin Dam?

Texas Basin Dam is in Owyhee County.

How high is the Texas Basin Dam?

Texas Basin Dam is 121 feet high.

How long is the Texas Basin Dam?

Texas Basin Dam is 380 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG