Twin Lakes Dam, Idaho, USA

Home / USA / Idaho / Twin Lakes Dam

Quick Facts About Twin Lakes Dam

Location: Kootenai, Idaho
Coordinates: 47.8582, -116.8644
River: Twin Lakes Rathdrum Creek River
Primary Purpose: Flood Risk Reduction
Type: Concrete
Commissioned: 2005
Dam Height: 14 ft (4 m)
Dam Length: 75 ft (23 m)
Dam Capacity: acre-ft (0 Ml)
Hazard Potential: Significant

Twin Lakes Dam Map

Here is a map of Twin Lakes Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Twin Lakes Dam Information

Twin Lakes Dam is dam located about 4 miles from Rathdrum, Kootenai, Idaho.

The dam, which is on the Twin Lakes Rathdrum Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by and commissioned in 2005 and is currently owned by .

Twin Lakes Dam Structure

The Twin Lakes Dam is approximately 75 feet (23 m) long, 14 feet (4 m) high and has a structural volume of cubic yards (0 cubic metres).

Twin Lakes Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 9,090 acre-ft (11,212 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 959 acres (388 ha) and the total catchment area is 51 square miles (132 square kilometres).

Twin Lakes Dam Spillway

The dam has a 18 feet (5 m) wide controlled spillway with a maximum discharge capacity of 770 cubic feet per second (22 cubic metres per second).

Twin Lakes Dam Compared to Four Famous American Dams

Twin Lakes Dam
Kootenai, Idaho
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 14 730 550 357 216
Length (Ft) 75 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 51 167,800 74,100 3,611 108,355

Twin Lakes Dam Weather

Current Conditions at Twin Lakes Dam

Failed to fetch current weather data.

7-Day Forecast for Twin Lakes Dam

Failed to fetch weather forecast data.

Twin Lakes Dam Frequently Asked Questions

In which state is the Twin Lakes Dam?

Twin Lakes Dam is in Idaho.

In which county is the Twin Lakes Dam?

Twin Lakes Dam is in Kootenai County.

How high is the Twin Lakes Dam?

Twin Lakes Dam is 14 feet high.

How long is the Twin Lakes Dam?

Twin Lakes Dam is 75 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG