Algonquin Dam, Illinois, USA

Home / USA / Illinois / Algonquin Dam

Quick Facts About Algonquin Dam

Location: McHenry, Illinois
Coordinates: 42.16574, -88.29009
River: Fox River
Primary Purpose: Flood Risk Reduction
Type: Concrete Rockfill
Commissioned: 1947
Dam Height: 9 ft (3 m)
Dam Length: 300 ft (91 m)
Dam Capacity: 24,200 acre-ft (29,850 Ml)
Hazard Potential: Significant
Condition Assessment: Not Available

Algonquin Dam Map

Here is a map of Algonquin Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Algonquin Dam Information

Algonquin Dam is a concrete rockfill dam located about 0.1 miles from Algonquin, McHenry, Illinois.

The dam, which is on the Fox River, was primarily built for Flood Risk Reduction purposes, but also serves for Recreation benefits.

The dam was designed by UNKNOWN and commissioned in 1947 and is currently owned by ILLINOIS DEPARTMENT OF NATURAL RESOURCES.

Algonquin Dam Structure

The Algonquin Dam is approximately 300 feet (91 m) long, 9 feet (3 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Algonquin Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 0 acre-ft (0 Ml) and maximum capacity of 24,200 acre-ft (29,850 Ml).

The surface area of the reservoir is acres (0 ha) and the total catchment area is square miles (0 square kilometres).

Algonquin Dam Spillway

According to the latest available data, the Algonquin Dam does not have any spillways.

Algonquin Dam Compared to Four Famous American Dams

Algonquin Dam
McHenry, Illinois
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 9 730 550 357 216
Length (Ft) 300 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 24,200 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 167,800 74,100 3,611 108,355

Algonquin Dam Weather

Current Conditions at Algonquin Dam

Failed to fetch current weather data.

7-Day Forecast for Algonquin Dam

Failed to fetch weather forecast data.

Algonquin Dam Frequently Asked Questions

In which state is the Algonquin Dam?

Algonquin Dam is in Illinois.

In which county is the Algonquin Dam?

Algonquin Dam is in McHenry County.

How high is the Algonquin Dam?

Algonquin Dam is 9 feet high.

How long is the Algonquin Dam?

Algonquin Dam is 300 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG