Canton City Lake Dam, Illinois, USA

Home / USA / Illinois / Canton City Lake Dam

Quick Facts About Canton City Lake Dam

Location: Fulton, Illinois
Coordinates: 40.56321, -89.97401
River: West Branch Copperas Creek River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1939
Dam Height: 57 ft (17 m)
Dam Length: 900 ft (274 m)
Dam Capacity: 9,080 acre-ft (11,200 Ml)
Condition Assessment: Not Available

Canton City Lake Dam Map

Here is a map of Canton City Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Canton City Lake Dam Information

Canton City Lake Dam is an earthen embankment dam located about 8 miles from Banner, Fulton, Illinois.

The dam, which is on the West Branch Copperas Creek River, was primarily built for Recreation purposes, but also serves for Water Supply benefits.

The dam was designed by KINSEY ENGINEERING CO. and commissioned in 1939 and is currently owned by CITY OF CANTON.

Canton City Lake Dam Structure

The Canton City Lake Dam is approximately 900 feet (274 m) long, 57 feet (17 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Canton City Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 4,540 acre-ft (5,600 Ml) and maximum capacity of 9,080 acre-ft (11,200 Ml).

The surface area of the reservoir is 285 acres (115 ha) and the total catchment area is 14 square miles (37 square kilometres).

Canton City Lake Dam Spillway

The dam has a 200 feet (61 m) wide uncontrolled spillway with a maximum discharge capacity of 32700 cubic feet per second (926 cubic metres per second).

Canton City Lake Dam Compared to Four Famous American Dams

Canton City Lake Dam
Fulton, Illinois
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 57 730 550 357 216
Length (Ft) 900 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 9,080 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 14 167,800 74,100 3,611 108,355

Canton City Lake Dam Weather

Current Conditions at Canton City Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Canton City Lake Dam

Failed to fetch weather forecast data.

Canton City Lake Dam Frequently Asked Questions

In which state is the Canton City Lake Dam?

Canton City Lake Dam is in Illinois.

In which county is the Canton City Lake Dam?

Canton City Lake Dam is in Fulton County.

How high is the Canton City Lake Dam?

Canton City Lake Dam is 57 feet high.

How long is the Canton City Lake Dam?

Canton City Lake Dam is 900 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG