Fermilab Main Injector Dam, Illinois, USA

Home / USA / Illinois / Fermilab Main Injector Dam

Quick Facts About Fermilab Main Injector Dam

Location: Kane, Illinois
Coordinates: 41.82292, -88.27147
River: Indian Creek River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1997
Dam Height: 18 ft (5 m)
Dam Length: 3,500 ft (1,067 m)
Dam Capacity: 9,000 acre-ft (11,101 Ml)
Condition Assessment: Not Available

Fermilab Main Injector Dam Map

Here is a map of Fermilab Main Injector Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Fermilab Main Injector Dam Information

Fermilab Main Injector Dam is an earthen embankment dam located about 0.4 miles from Batavia, Kane, Illinois.

The dam, which is on the Indian Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by FLUOR DANIEL and commissioned in 1997 and is currently owned by U.S. DEPARTMENT OF ENERGY.

Fermilab Main Injector Dam Structure

The Fermilab Main Injector Dam is approximately 3,500 feet (1,067 m) long, 18 feet (5 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Fermilab Main Injector Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 0 acre-ft (0 Ml) and maximum capacity of 9,000 acre-ft (11,101 Ml).

The surface area of the reservoir is acres (0 ha) and the total catchment area is square miles (0 square kilometres).

Fermilab Main Injector Dam Spillway

The dam has a 9 feet (3 m) wide uncontrolled spillway with a maximum discharge capacity of cubic feet per second (0 cubic metres per second).

Fermilab Main Injector Dam Compared to Four Famous American Dams

Fermilab Main Injector Dam
Kane, Illinois
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 18 730 550 357 216
Length (Ft) 3,500 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 9,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 167,800 74,100 3,611 108,355

Fermilab Main Injector Dam Weather

Current Conditions at Fermilab Main Injector Dam

Failed to fetch current weather data.

7-Day Forecast for Fermilab Main Injector Dam

Failed to fetch weather forecast data.

Fermilab Main Injector Dam Frequently Asked Questions

In which state is the Fermilab Main Injector Dam?

Fermilab Main Injector Dam is in Illinois.

In which county is the Fermilab Main Injector Dam?

Fermilab Main Injector Dam is in Kane County.

How high is the Fermilab Main Injector Dam?

Fermilab Main Injector Dam is 18 feet high.

How long is the Fermilab Main Injector Dam?

Fermilab Main Injector Dam is 3,500 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG