Lake Jacksonville Dam, Illinois, USA

Home / USA / Illinois / Lake Jacksonville Dam

Quick Facts About Lake Jacksonville Dam

Location: Morgan, Illinois
Coordinates: 39.67151, -90.21631
River: Sandy Creek River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1939
Dam Height: 54 ft (16 m)
Dam Length: 980 ft (299 m)
Dam Capacity: 12,812 acre-ft (15,803 Ml)
Hazard Potential: Significant
Condition Assessment: Not Available

Lake Jacksonville Dam Map

Here is a map of Lake Jacksonville Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Lake Jacksonville Dam Information

Lake Jacksonville Dam is an earthen embankment dam located about 24 miles from Belltown, Morgan, Illinois.

The dam, which is on the Sandy Creek River, was primarily built for Recreation purposes, but also serves for Water Supply benefits.

The dam was designed by WARREN & VAN PRAAG, INC. and commissioned in 1939 and is currently owned by CITY OF JACKSONVILLE.

Lake Jacksonville Dam Structure

The Lake Jacksonville Dam is approximately 980 feet (299 m) long, 54 feet (16 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Lake Jacksonville Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 6,099 acre-ft (7,523 Ml) and maximum capacity of 12,812 acre-ft (15,803 Ml).

The surface area of the reservoir is 477 acres (193 ha) and the total catchment area is 11 square miles (28 square kilometres).

Lake Jacksonville Dam Spillway

The dam has a 160 feet (49 m) wide uncontrolled spillway with a maximum discharge capacity of 14582 cubic feet per second (413 cubic metres per second).

Lake Jacksonville Dam Compared to Four Famous American Dams

Lake Jacksonville Dam
Morgan, Illinois
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 54 730 550 357 216
Length (Ft) 980 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 12,812 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 11 167,800 74,100 3,611 108,355

Lake Jacksonville Dam Weather

Current Conditions at Lake Jacksonville Dam

Failed to fetch current weather data.

7-Day Forecast for Lake Jacksonville Dam

Failed to fetch weather forecast data.

Lake Jacksonville Dam Frequently Asked Questions

In which state is the Lake Jacksonville Dam?

Lake Jacksonville Dam is in Illinois.

In which county is the Lake Jacksonville Dam?

Lake Jacksonville Dam is in Morgan County.

How high is the Lake Jacksonville Dam?

Lake Jacksonville Dam is 54 feet high.

How long is the Lake Jacksonville Dam?

Lake Jacksonville Dam is 980 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG