Melvin Price Locks and Dam, Illinois, USA

Home / USA / Illinois / Melvin Price Locks and Dam

Quick Facts About Melvin Price Locks and Dam

Location: St. Charles, Illinois
Coordinates: 38.866913, -90.154877
River: Mississippi River
Primary Purpose: Navigation
Type: Concrete Other
Commissioned: 1990
Dam Height: 72 ft (22 m)
Dam Length: 1,700 ft (518 m)
Dam Capacity: 238,000 acre-ft (293,568 Ml)
Hazard Potential: Significant
Condition Assessment: Not Available

Melvin Price Locks and Dam Map

Here is a map of Melvin Price Locks and Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Melvin Price Locks and Dam Information

Melvin Price Locks and Dam is a concrete other dam located about 1 miles from Alton, St. Charles, Illinois.

The dam, which is on the Mississippi River, was primarily built for Navigation purposes, but also serves for benefits.

The dam was designed by CEMVS and commissioned in 1990 and is currently owned by USACE – St. Louis District.

Melvin Price Locks and Dam Structure

The Melvin Price Locks and Dam is approximately 1,700 feet (518 m) long, 72 feet (22 m) high and has a structural volume of 340,000 cubic yards (259,949 cubic metres).

Melvin Price Locks and Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 238,000 acre-ft (293,568 Ml) and maximum capacity of 238,000 acre-ft (293,568 Ml).

The surface area of the reservoir is 30,000 acres (12,141 ha) and the total catchment area is 171,470 square miles (444,106 square kilometres).

Melvin Price Locks and Dam Spillway

The dam has a 1160 feet (354 m) wide controlled spillway with a maximum discharge capacity of 650000 cubic feet per second (18406 cubic metres per second).

Melvin Price Locks and Dam Compared to Four Famous American Dams

Melvin Price Locks and Dam
St. Charles, Illinois
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 72 730 550 357 216
Length (Ft) 1,700 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 238,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 171,470 167,800 74,100 3,611 108,355

Melvin Price Locks and Dam Weather

Current Conditions at Melvin Price Locks and Dam

Failed to fetch current weather data.

7-Day Forecast for Melvin Price Locks and Dam

Failed to fetch weather forecast data.

Melvin Price Locks and Dam Frequently Asked Questions

In which state is the Melvin Price Locks and Dam?

Melvin Price Locks and Dam is in Illinois.

In which county is the Melvin Price Locks and Dam?

Melvin Price Locks and Dam is in St. Charles County.

How high is the Melvin Price Locks and Dam?

Melvin Price Locks and Dam is 72 feet high.

How long is the Melvin Price Locks and Dam?

Melvin Price Locks and Dam is 1,700 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG