Page Park Dam, Illinois, USA

Home / USA / Illinois / Page Park Dam

Quick Facts About Page Park Dam

Location: Winnebago, Illinois
Coordinates: 42.31015, -89.16561
River: Kent Creek River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1980
Dam Height: 41 ft (12 m)
Dam Length: 3,650 ft (1,113 m)
Dam Capacity: 12,014 acre-ft (14,819 Ml)
Condition Assessment: Not Available

Page Park Dam Map

Here is a map of Page Park Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Page Park Dam Information

Page Park Dam is an earthen embankment dam located about 0.1 miles from Rockford, Winnebago, Illinois.

The dam, which is on the Kent Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by CORPS OF ENGINEERS and commissioned in 1980 and is currently owned by CITY OF ROCKFORD.

Page Park Dam Structure

The Page Park Dam is approximately 3,650 feet (1,113 m) long, 41 feet (12 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Page Park Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 9 acre-ft (11 Ml) and maximum capacity of 12,014 acre-ft (14,819 Ml).

The surface area of the reservoir is acres (0 ha) and the total catchment area is square miles (0 square kilometres).

Page Park Dam Spillway

The dam has a 207 feet (63 m) wide uncontrolled spillway with a maximum discharge capacity of 37582 cubic feet per second (1064 cubic metres per second).

Page Park Dam Compared to Four Famous American Dams

Page Park Dam
Winnebago, Illinois
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 41 730 550 357 216
Length (Ft) 3,650 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 12,014 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 167,800 74,100 3,611 108,355

Page Park Dam Weather

Current Conditions at Page Park Dam

Parameter Value
Current Time 20:47
Sunrise 05:19
Sunset 20:34
Temperature (°F) 75
Feels Like (°F) 75
Cloud Coverage (%) 75
Pressure (inHg) 1017
Humidity (%) 60
Wind Speed (mph) 5
Rain (mm) 0

7-Day Forecast for Page Park Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 58 77 73 1017 69 9 18 E 0 - overcast clouds
Sun 60 81 79 1019 63 9 18 E 0 - scattered clouds
Mon 60 80 76 1014 70 8 16 SSE 0 - overcast clouds
Tue 64 85 86 1007 65 19 34 SW 71 1 light rain
Wed 67 77 73 1008 86 12 25 SW 100 7 moderate rain
Thu 63 72 64 1011 89 15 26 NNW 100 30 heavy intensity rain
Fri 61 81 82 1014 61 13 29 SSW 95 1 light rain
Sat 71 89 93 1010 65 15 32 WSW 64 - clear sky

Page Park Dam Frequently Asked Questions

In which state is the Page Park Dam?

Page Park Dam is in Illinois.

In which county is the Page Park Dam?

Page Park Dam is in Winnebago County.

How high is the Page Park Dam?

Page Park Dam is 41 feet high.

How long is the Page Park Dam?

Page Park Dam is 3,650 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG